So I ordered obx headers and the passenger side went in easy. But I can't get the driver's side in, it is catching on something. What is the best and easiest way without cutting to get it in?
Printable View
So I ordered obx headers and the passenger side went in easy. But I can't get the driver's side in, it is catching on something. What is the best and easiest way without cutting to get it in?
It depends on what its caught on. Is it hitting the K member? If so your going to need to grind it.
try removing MM pedestal.......worked for me
Nevermind I got it in, I banged the firewall back a tiny bit
the BFH mod! I did the same thing.Quote:
Originally Posted by 98TransAmWs-6
remove the MM Ped..........and put that hammer away :tap:
Mine was actually the steering linkage bar. The one that has a universal joint looking thing in it. Took that out and had more room that I ever could have asked for. Getting it back in was a trick though.
Doing that right now any tips for putting it back in?Quote:
Originally Posted by IH8EVRY1
Take a medium size flat screw driver and use it to spread the slip on section of the linkage. You may be able to twist the screwdriver some to get it to spread enough. I used a hammer and tapped it a few times and pulled the screw driver back out. After I did that mine slipped right back together.