Lower Control Arm Relocation Brackets

Im thinking about getting these to help my sixty foot time but want to know if they are worth it. My 60' right now is usually around 2.0-2.1. I run on street tires and drive a m6 trans. I want to be in the high 1's and am hoping this cheap upgrade will do it for me. What do you think?

I just sold a pair on here not too long ago as I ended up buying a rear with welded relocation brackets. Not a bad idea to upgrade your LCA's as well and install SFC's if you have not yet done so.

you'll probably see more gains out of drag radials than you will LCA's on street tires. Drag radials alone will get your 60's in the 1.8x most likely.

Quote:

---

Originally Posted by pajeff02

I just sold a pair on here not too long ago as I ended up buying a rear with welded relocation brackets. Not a bad idea to upgrade your LCA's as well and install SFC's if you have not yet done so.

---

Trying to keep this one under 100 bucks. Ill do that if I redo the whole suspension. You know of anywhere I can buy some for the stock rear

Quote:

---

Originally Posted by 0rion

you'll probably see more gains out of drag radials than you will LCA's on street tires. Drag radials alone will get your 60's in the 1.8x most likely.

---

not trying to break my 10 bolt just yet and I was thinking about a pair of dr's until I read all the stories on here.

Quote:

---

Originally Posted by jetaws6

Trying to keep this one under 100 bucks. Ill do that if I redo the whole suspension. You know of anywhere I can buy some for the stock rear

---

Mine were UMI Performance pieces -- you can order through KY Speed (site sponsor) and if you have any questions shoot "marksls1ta" a PM.

Here's what they look like:

http://i667.photobucket.com/albums/v...o/DSC02482.jpg

Quote:

---

Originally Posted by pajeff02

Mine were UMI Performance pieces -- you can order through KY Speed (site sponsor) and if you have any questions shoot "marksls1ta" a PM.

Here's what they look like:

---

yea i probably will order through him hes got some good prices I am just kinda testing the water on them now though and seeing what people think about em. Yours were weld ins though right? Can you get these in a bolt on?

Quote:

---

Originally Posted by jetaws6

yea i probably will order through him hes got some good prices I am just kinda testing the water on them now though and seeing what people think about em. Yours were weld ins though right? Can you get these in a bolt on?

---

Nope. The brackets in the picture are bolt in. I ended up replacing our rear with a Moser 12 bolt and ordered it with welded brackets pre-installed.

Quote:

---

Originally Posted by pajeff02

Nope. The brackets in the picture are bolt in. I ended up replacing our rear with a Moser 12 bolt and ordered it with welded brackets pre-installed.

---

Sweet man how much were they if you dont mind me asking

I am thinking they were around $80.00. Don't quote me on that though.

Quote:

---

Originally Posted by pajeff02

I am thinking they were around $80.00. Don't quote me on that though.

---

Sounds about right.

15% off sale started today on UMI products!!

Thanks,
Mark