Muffler Delete Pipe

Hey all. I made this pipe like 2 years ago and ended up going with dumps, so I figured i'd give someone else a chance to use it. It's a direct fit slip-on pipe that goes in place of your muffler. Simply cut your current muff off, slide this on, and either weld or clamp it in place. I opened up the ends with plenty of clearance, so there won't be any problems. The inlet is 2.5", the outlets are 3". I'm almost 100% sure the system I'd designed it off of was stock, so this should fit on a stock system. I'd go and check myself but I don't have the car anymore, so anyone that knows this, feel free to correct or confirm.

Made out of exhaust tube stock, and has since been coated with underbody deterrent stuff (not shown in pic), welded completely with no leaks. In case anyone wants to check fitment, the length from 3" end to 3" end is 23 3/4", and the length from the center of the 2.5" end to the center of the 3" end is roughly 7".

Asking $50.00 + whatever shipping would be to you, but I'm open to offers


http://i.ebayimg.com/01/!BTGjUfg!mk~...vHve,Q~~_1.JPG

good idea