SLP Blackwing: Filter?

Printable View

Show 100 post(s) from this thread on one page

04-23-2009, 07:12 AM
SS1Eagle

SLP Blackwing: Filter?

I just popped open my SLP Blackwing lid and found the stock GM air filter with 2 bugs and a feather lodged in the air filter folds.

I want to know if this is the correct K&N air filter part number I should purchase? One of my first basic mods.

http://www.lmperformance.com/553/1.html

It's pricey but any other links you guys can offer with reasonable price options? So far LMP has been satisfactory with my orders.

I am performing a Search to see if the K&N filter media impregnated oil will mess with my Mass Airflow Sensor. These blinking advertisements such as Granatelli MAFS make me want to research this further.

Feedback appreciated!
04-23-2009, 07:18 AM
Sarge

Quote:

Originally Posted by SS1Eagle

I just popped open my SLP Blackwing lid and found the stock GM air filter with 2 bugs and a feather lodged in the air filter folds.

I want to know if this is the correct K&N air filter part number I should purchase? One of my first basic mods.

http://www.lmperformance.com/553/1.html

It's pricey but any other links you guys can offer with reasonable price options? So far LMP has been satisfactory with my orders.

I am performing a Search to see if the K&N filter media impregnated oil will mess with my Mass Airflow Sensor. These blinking advertisements such as Granatelli MAFS make me want to research this further.

Feedback appreciated!

Screw K&N. 50's technology and doesn't filter worth a damn. Oil on cotton is caveman methodology of air filtration.
Get with the program man.....
http://www.amsoil.com/storefront/eaa.aspx
04-23-2009, 07:20 AM
Sarge

I think this is your filter specific....
http://www.amsoil.com/catalog.aspx?code=EAA83-EA
04-23-2009, 07:21 AM
rbob93

Quote:

Originally Posted by Sarge

Screw K&N. 50's technology and doesn't filter worth a damn. Oil on cotton is caveman methodology of air filtration.
Get with the program man.....
http://www.amsoil.com/storefront/eaa.aspx

No shit man!

(ut-oh.....here come all the K&N lovers to say they never have a problem)

:hide:
04-23-2009, 07:32 AM
Sarge

Bias Ply Tires still roll....so "I never had a problem with my Bias Ply Tires" doesn't necessarily mean Bias Ply Tires are the way to go. Same with cotton being all oiled up.
News Flash. Man Made nano fiber technology flows/filters better than your underwear all oiled up and put between a wire mesh.
04-23-2009, 04:39 PM
blackSS01

Quote:

Originally Posted by Sarge

Bias Ply Tires still roll....so "I never had a problem with my Bias Ply Tires" doesn't necessarily mean Bias Ply Tires are the way to go. Same with cotton being all oiled up.
News Flash. Man Made nano fiber technology flows/filters better than your underwear all oiled up and put between a wire mesh.

:lmao: :lol:
04-24-2009, 12:44 AM
BADASS2000SS

Quote:

Originally Posted by Sarge

Bias Ply Tires still roll....so "I never had a problem with my Bias Ply Tires" doesn't necessarily mean Bias Ply Tires are the way to go. Same with cotton being all oiled up.
News Flash. Man Made nano fiber technology flows/filters better than your underwear all oiled up and put between a wire mesh.

Damit, thanks Sarge, I did not know I was supposed to remove the wire mesh BEFORE putting my underware on! That shit was really starting to hurt everytime I ran!
04-24-2009, 03:33 AM
JoshieDoom

When I took out my K&N it was falling apart. Replaced it with a stock paper filter. Need to get an amsoil one here soon!

BTW get some maf cleaner and clean you stock MAF and KEEP IT!
04-24-2009, 05:05 AM
SS1Eagle

Wow...Thanks Sarge! :cheers:

Just curious if I get a nifty Amsoil sticker supplied for my toolbox? :D
04-24-2009, 07:27 AM
Sarge

Quote:

Originally Posted by SS1Eagle

Wow...Thanks Sarge! :cheers:

Just curious if I get a nifty Amsoil sticker supplied for my toolbox? :D

Shit I dunno. Ask CompSyn.
04-24-2009, 07:37 AM
Dr.Crash

Quote:

Originally Posted by BADASS2000SS

Damit, thanks Sarge, I did not know I was supposed to remove the wire mesh BEFORE putting my underware on! That shit was really starting to hurt everytime I ran!

Hey he said underware, not thongs. We dont need to hear about your man thong. Thanks
04-24-2009, 08:30 AM
SteelCityTA

I have been enlightened! I used to use K&N on my cars but quit awhile back just becasue of cleaning and maintaining them sucks! I have been using just paper ones but I will have to check this amsoil one out...now it does say that it collects alot more, but does that also indicate that it may restrict airflow as well?
04-24-2009, 09:50 AM
Blue28

All you do with the Amsoil filter is blow it out real good(shop vac is what I use), and you're done!
Great air filter!
04-24-2009, 09:54 AM
SteelCityTA

Quote:

Originally Posted by Blue28

All you do with the Amsoil filter is blow it out real good(shop vac is what I use), and you're done!
Great air filter!

What about compressed air, is is safe to shoot it with a compressor or will it damage it?
04-24-2009, 12:57 PM
Smittro

I dont use K&N anything on my cars. Never tried the Amsoil one.
04-24-2009, 04:42 PM
Blue28

Quote:

Originally Posted by SteelCityTA

What about compressed air, is is safe to shoot it with a compressor or will it damage it?

They recommend low pressure air.

This is from the AMSoil wedsite:

Cleaning
EaA filters should be cleaned every year or 25,000 miles, whichever comes first. Carefully remove the filter from the housing. Clean the housing with a shop towel, being careful not to knock contaminants into the air inlet. Filters can be cleaned by carefully vacuuming the filter media on the dirty side, or by holding the filter with one hand and carefully blowing the filter media at a 45 degree angle on the clean side using low-pressure shop air (15-20 lbs. psi).
04-24-2009, 05:39 PM
SteelCityTA

Quote:

Originally Posted by Blue28

They recommend low pressure air.

This is from the AMSoil wedsite:

Cleaning
EaA filters should be cleaned every year or 25,000 miles, whichever comes first. Carefully remove the filter from the housing. Clean the housing with a shop towel, being careful not to knock contaminants into the air inlet. Filters can be cleaned by carefully vacuuming the filter media on the dirty side, or by holding the filter with one hand and carefully blowing the filter media at a 45 degree angle on the clean side using low-pressure shop air (15-20 lbs. psi).

You are a gentlemen and a scholar:lol: Thanks bro! I will be getting one! along with some oil as well
04-24-2009, 09:33 PM
BADASS2000SS

Quote:

Originally Posted by Dr.Crash

Hey he said underware, not thongs. We dont need to hear about your man thong. Thanks

Wow, you are on me like white on rice Crash, this is twice in one night so far! Dont over step your boundries....I have people! I will call in the members of the TJEA to jump your ass if this keeps up...heed the warning my friend, the last people you want messing with you is Andy and Terry!
04-24-2009, 09:36 PM
Dr.Crash

Quote:

Originally Posted by BADASS2000SS

Wow, you are on me like white on rice Crash, this is twice in one night so far! Dont over step your boundries....I have people! I will call in the members of the TJEA to jump your ass if this keeps up...heed the warning my friend, the last people you want messing with you is Andy and Terry!

I got people too, H and R block bish. dont mess with my people. and you can call off your guard poodles. cuz im not scared. :lmao:
04-24-2009, 09:48 PM
Y2KArcticSS

Quote:

Originally Posted by Dr.Crash

I got people too, H and R block bish. dont mess with my people. and you can call off your guard poodles. cuz im not scared. :lmao:

I have Verizon, I'm in good hands with Allstate, and I stayed at a Holiday Inn Express last night.

Are you in good hands?............. :lol: That's Allstate's stand.

Show 100 post(s) from this thread on one page