Thread Locker on Fuel Rails

I'm putting together some aftermarket fuel rails and was wondering if this product would be enough for the fittings.

http://www.performanceonline.com/sto...cat=654&page=1

http://www.performanceonline.com/sto...t_18021_01.jpg

I used the teflon stuff.

You want thread sealer, not locker.

:stupid:

If the adaption of the fuel rails use a "conical" end AN fitting, it will seal itself when the fuel line is installed, if the fuel rail fitting end is not conical, I would use thread tape that is made for oil and fuel.

SteveC :)