stock top parts/harmonic B needed for 01'SS

Valve covers, fuel rails, knock harness, oil sender and the bolts that hold the intake on . My motor was damaged from an engine fire and need most of the top parts were destroyed

I have slowly accumulated a few things to make it go again but need your help . Thanks !

I'll have some stock fuel rails for you in a few weeks if you can hold out till then.

I have the balancer off my 98.....same as the 01's if you're interested in an older one.

Quote:

---

Originally Posted by atsiauto

Valve covers, fuel rails, knock harness, oil sender and the bolts that hold the intake on . My motor was damaged from an engine fire and need most of the top parts were destroyed

I have slowly accumulated a few things to make it go again but need your help . Thanks !

---

I have an ATI SuperDampener and Crank Pulley(10% under drive) off an 02' Z06 if it will work and you have interest let me know.

I'm pretty sure the vette's are different. I think the depth is different on the vettes due to accessory locations.

I have the stock balancer off a '02 Firehawk!