speedyWS6
Member

Ugh. The MAF is a metering device and any modifications will throw off its calibration. Best not to play with a MAF, however, I doubt that removing the screen would cause the issue you are experiencing. To be 100% certain though, it is very simple to test for a bad MAF -- simply unplug it and...

Replaced both lower ball joints as well. Upper joints seemed fine and are easy to do, whereas the lowers are a bit more work. Unfortunately, they don't leave any lip on the control arm around the lower ball joints so I ended up using a BFH, rather than my press, to remove them. The stock joints...