Results 1 to 5 of 5
Thread: New guy
-
06-10-2009, 07:31 PM #1
- Join Date
- Jun 2009
- Location
- Eaton Rapids, MI
- Posts
- 3
Mag Red- 2002 Corvette
New guy
Ed here, I have a 2002 Mag Red, A4 Corvette Coupe, has a few mods, BBK CAI Ported throttle body 243 ported heads and comp cam very mild 212/218, headers and rear was changed to 3.42.
Guess need some more advise on what to upgrade etc
Ed
-
06-10-2009, 07:34 PM #2
Welcome to ls1.com
What #'s are you putting down with that?
It seems the only thing to do is add a stall to your system, that or port and mill your current heads and or put in a bigger cam anything you want the car to do particularly well in?
-
06-10-2009, 07:47 PM #3
- Join Date
- Jun 2009
- Location
- Eaton Rapids, MI
- Posts
- 3
Mag Red- 2002 Corvette
The heads are already ported, just wanted to have some really good low and Mid range torque. I haven't had it dyno'd yet but will in the next couple of weeks. I had Trifecta do the tune mail order with 4 data logs and uploads was really happy with what they did.
-
06-10-2009, 08:06 PM #4
With that small a cam you can mill the hell out of the heads for extra hp. Milling will help out alot w/ power under the curve(as well as up top) where porting shows more gains up top.
This brings me back to would a stall be for you and whhere do you want the car to shine, road race, auto x, drag or just street where the low to mid power is key.
-
06-11-2009, 03:51 AM #5
- Join Date
- Jun 2009
- Location
- Eaton Rapids, MI
- Posts
- 3
Mag Red- 2002 Corvette
The biggest place is on the street where low and mid range power is key, I may take them off and have them milled during the winter, but hate to have the car apart again!!! Guess I will have to get over it. Thanks for the advice.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks