Greetings from Frederick, Maryland!

[LeeV]

Hello to everybody! I just found this group today, and hope that I can contribute, although I'm fairly certain that I'll learn much more than I can offer! I've just purchased an LS1 engine/tranny that came out of a 2004 Denali Yukon, and I'm getting ready to install it in a 1988 Jeep Wrangler! Should be an interesting project; I tell everybody it's my mid-life crisis come to fruition! :-)
In any case, I'm glad to have found all of you! ~Lee

[Y2KPewterSS]

Welcome to the site Lee

[texinteg]

If you need any help installing it let me know. I have a few pointers if you havent done a swap like this before. I will most likely be swapping a 6.0l in my cherokee in the spring.

[superchargedblackgto]

Welcome to the site, check out the forums, there is alot of helpful info on here....good luck with the project

[LeeV]

Thanks for the welcome; I look forward to hearing what everybody has to say!

[LeeV]

If you need any help installing it let me know. I have a few pointers if you havent done a swap like this before. I will most likely be swapping a 6.0l in my cherokee in the spring.

You are welcome to throw any pointers you have my way!!!! I can use all the help I can get - I've never tried anything like this at all, but I'm persistent!

[Jays00ss]

welcome from Frederick, Colorado!!!

[LeeV]

Hahahaha!~ That is too funny! Next you'll be telling me you buy parts in Brunswick, Colorado, since I teach high school in Brunswick, MD! :-)

[casperss]

welcome

[LeeV]

Thanks! Now if I can just figure out what all those wires do.....!

[Formula Dave]

Wekcome fellow Marylander... good luck with your project