Tunning LS1 turbo applications in new jersey

[spooled88monte]

im building a turbo LS1 and was looking for a shop that can tune a turbo setup in new jersey. i dont mind driving an hour or so if its a good shop. i live in south jersey. any help would be appreciated. thanks

[Wesman]

I would try Harris Speed Works in Warminster, PA. I had my car tuned there (bolt on tune) and I was very satisfied with everything. Very professional, and they did a great job. They are probably between an hour and an hour and a half away from your listed town.

They are a sponsor here, website is www.harrisspeedworks.com.

[spooled88monte]

thanks, ill give them a call to see what they can do

[Frost]

If you are making more than 7-8#s and a tuner tries to get you to accept a MAF tune, walk away. EFIL AND HPT have excellent 2bar OS's; there is no reason to have a half-@$$3D MAF tune

[spooled88monte]

i am correct that the factory map sensor is a 3 bar system, and if i want to tune a turbo set up that i have to use a 2 bar system? also with the 2 bar system does that replace the maf sensor? ive seen people with turbo setups with no maf.

[Frost]

i am correct that the factory map sensor is a 3 bar system, and if i want to tune a turbo set up that i have to use a 2 bar system? also with the 2 bar system does that replace the maf sensor? ive seen people with turbo setups with no maf.

No the factory setup is combined fueling from the single bar MAP and MAF. 2bar systems let the PCM "see" boost; as it cannot do this now. Yeah you get to toss out your MAF.