Results 1 to 1 of 1

tuning the pcm with Edit

This is a discussion on tuning the pcm with Edit within the Computer & Tuning forums, part of the LSx Technical Help Section category; I know there are not a lot of Edit users out there, but I have reached the point in my ...

  1. #1
    Junior Member 98goldta's Avatar
    Join Date
    Sep 2005

    1998 trans am

    tuning the pcm with Edit

    I know there are not a lot of Edit users out there, but I have reached the point in my engine rebuild where I need to set up the pcm for my changes. I have a 98 ls1 that is completely stock except for the following: ls6 cam with 551 lift and the ls6 intake. port and polished ls1 heads. no egr and a 2000 stall with 3.08 gears. All of this through shorty headers and high flow cats. I have the file for a stock 02 ls6 and thought that copying the relavent tables like timing and fuel is all i need to do to get it to run since the maf ,throttle body and injectors are all the same. will it start and run without these changes is another question so that i could eliminate pcm issues on the start up until the engine is broke in. any help is appreciated
    Last edited by 98goldta; 12-26-2010 at 06:28 AM.
    1998 Gold T/A 1 of 235 built, 3.08 moser 12 bolt, k&n filter, TB mod, egr mod, Lingenfelter 3.5" alum ds, Pcv oil catch can, BMR Lca's, Bilstein HD Shocks, Poly Sway Bar bushings, Full Ram Air Hood, optima red top, 220000 +miles ,never been to track Currently motor and tranny being rebuilt

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts