Results 1 to 4 of 4
  1. #1
    Junior Member
    Join Date
    Mar 2013
    Location
    rhode island
    Posts
    2

    silver
    2002 T/A

    P0155 & P0135 codes

    I have a 2002 T/A with an LS6 engine and keep getting P0135 & P0155 codes...car is running in closed loop most of the time. Wiring has been tested and is OK. Coolant system is working normally. All sensor have been replaced and are new. Car has ARH long tube headers. Freeze frame data shows normal fuel trims and normal o2 sensor operation. The exhaust has multiple pin hole leaks downstream starting about 2' after the bank 2 sensors. The leaks are from band clamp style clamps.

    Does anyone have any advice/insight on what may be causing this and how I can fix it? Thanks in advance for any information you can lend.

  2. #2
    Veteran 0rion's Avatar
    Join Date
    Aug 2005
    Location
    ohio
    Posts
    22,554

    98 Formula
    06 duramax

    what sensors are you running? Those are heater codes and are pretty common with longtubes. Not everyone gets them but quite a few do. I switched to bosch 13111 sensor some years ago and haven't had a heater code since. I believe firebirdjones also had the same luck when switching to 13111 sensors. That's actually the part number for rear sensors on the vettes. They have a longer harness and *supposedly* have a better heater in them. Not sure how much I believe the heater stuff but I will say I haven't had a heater code since switching and that's been at least 5 years ago....probably more.

  3. #3
    Senior Member theorangeguy's Avatar
    Join Date
    May 2013
    Location
    Nashville, TN
    Posts
    1,434

    Black / White
    '00 T/A M6/'19 Hemi Truck

    Quote Originally Posted by 0rion View Post
    what sensors are you running? Those are heater codes and are pretty common with longtubes. Not everyone gets them but quite a few do. I switched to bosch 13111 sensor some years ago and haven't had a heater code since. I believe firebirdjones also had the same luck when switching to 13111 sensors. That's actually the part number for rear sensors on the vettes. They have a longer harness and *supposedly* have a better heater in them. Not sure how much I believe the heater stuff but I will say I haven't had a heater code since switching and that's been at least 5 years ago....probably more.
    I switched to the C5 corvette sensors about a week after I bought my car as well. Highly recommend them.
    2000 Black TA M6 - LT's, ORY, UMI Short Stick, TT2's, Drilled/Slotted Rotors, Braided Lines, and Tuned by Vengeance SCCA and Car Show Approved
    2019 Ram 1500 Crew Cab Laramie Limited
    2015 Ram 1500 Crew Cab Sport Premium Hemi - Sold
    2010 Hemi Crew Cab Sport Premium - Tuner and HID's - Sold
    06 Quad Cab HHHHemi - Sold
    99 Hugger Orange Camaro - Sold
    97 Camaro - Sold

  4. #4
    Junior Member
    Join Date
    Mar 2013
    Location
    rhode island
    Posts
    2

    silver
    2002 T/A

    Great question and not sure as they were just changed recently...I'll check with my friend who is trying to diagnose this problem and will get back to you via this thread-thanks so much for the prompt response

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. P0135 Help ASAP
    By WS6ICK2K in forum Computer & Tuning
    Replies: 23
    Last Post: 01-15-2012, 12:20 PM
  2. P0101 & p0155?
    By srv8800 in forum General Help
    Replies: 7
    Last Post: 05-27-2011, 05:08 AM
  3. low idle and p0155 code
    By slpdablueZ28 in forum General Help
    Replies: 4
    Last Post: 04-06-2010, 03:01 PM
  4. Question: Codes p0135 p0155 and p1258
    By buswwa in forum Computer & Tuning
    Replies: 4
    Last Post: 12-04-2008, 09:51 AM
  5. SES light with 2 codes....P0155 & P0174???
    By danman in forum General Help
    Replies: 3
    Last Post: 05-31-2006, 10:34 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •