Results 1 to 10 of 10
Thread: EFI tuner Intake ?
-
06-15-2008, 07:19 PM #1
EFI tuner Intake ?
im new to the tuning stuff and i just got done putting the 92mm TB and Intake manifold on the car along with the slp lid wich was all stock before. im not seing much more for horsepower i was wondering what i need to do in order to tune this thing without going to a dyno tune and bend over to pay them. i plan on getting it dyno tuned after i put the heads and cam on. but for now i just want to be able to get by with what i have and see a little bit of a difference on it. i also have QTP headers and ORY on it. if anyone one could help it would make my experience worth while. i have an EFI v2 tuner. thanks in advance.
2002 WS.6--------------------1994 Camaro
QTP LT headers-----------------V6 3.4L Bone stock!
QTP ORY W/Cutouts - POS!
SLP CAI Lid
SLP Line Locks
Aeroforce OBD-II Gauges
92mm FAST Intake
92mm FAST TB
Stage 2 A4 trans
-
06-16-2008, 08:38 AM #2
That intake will make little-to-no power with the stock cam in the car, and could actually cost you a little torque down low. What it does make will be in the top of the RPM band.
-
06-18-2008, 01:16 PM #3
- Join Date
- Aug 2005
- Location
- Billings,MT
- Posts
- 428
Sunset Orange Metalic- 2002 Firehawk
O.K. that's 3 from Montana now - Frost when are you coming to tune us??LOL
-
06-18-2008, 01:57 PM #4
man that's a long hike!
-
06-18-2008, 03:19 PM #5
-
06-18-2008, 03:22 PM #6
if it is you. you should come out to the drag stip in july with me, im in washington right now. but i would love to see your car run.
-
06-19-2008, 04:13 AM #7
- Join Date
- Aug 2005
- Location
- Billings,MT
- Posts
- 428
Sunset Orange Metalic- 2002 Firehawk
Broke the motor in Novemeber - Built a 402 low compression stroker - Still having problems getting it right - Found out Tuesday that the builder installed the wrong cam gear - Having to pull it out and send it back - July does not look promising,but thanks for the offer - I WILL MAKE IT TO THE TRACK - I WILL MAKE IT TO THE TRACK - I WILL MAKE ........... LOL
-
07-07-2008, 06:44 AM #8
- Join Date
- May 2007
- Location
- virginia
- Age
- 54
- Posts
- 168
navy blue metallic- 2000 z28 camaro
HEY FROST IM IN STAUNTON VA AND NEED A TUNE JUST DID A CAM ,HEADERS,Y-PIPE,SLP LID, EATON POSI AND RICHMOND 4.10S CAN IT BE DONE AT MY HOUSE IF SO WHEN CAN WE HOOK UP!!! MY EMAIL IS SCOTTSTAPELKAMP@YAHOO.COM
4.10 RICHMOND GEARS,LAKEWOOD LCA'S,EATON POSI,EDELBROCK TORQUE ARM,
LAKEWOOD PANHARD BAR,SLP LID,,B&M RIPPER SHIFTER,EDELBROCK STRUT TOWER BRACE,SLP FAN CONTROL,SLP LINE LOCK,17 INCH ZR1S WITH 315 35S AND 275 40S,SLP Y-PIPE,TSP 224/224 112LSA CAM,COMP SPRINGS,TUNED BY FROST @ LSXTUNE.COM
-
07-07-2008, 06:45 AM #9
- Join Date
- May 2007
- Location
- virginia
- Age
- 54
- Posts
- 168
navy blue metallic- 2000 z28 camaro
Anyone Know Of Any Tuners Close To Harrisonburg/staunton Area???
-
07-07-2008, 06:59 AM #10
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BBK SSI Intake, vs Holley Intake, vs LS6 intake, vs PP 96mm
By Lunatikgixxer in forum External EngineReplies: 26Last Post: 02-28-2017, 10:39 AM -
cranecams tuner and Predator Tuner???
By jakef777 in forum Computer & TuningReplies: 3Last Post: 12-03-2007, 06:41 PM -
Single Plane Intake VS Stock PP Intake
By xzaero0 in forum Forced InductionReplies: 1Last Post: 11-27-2007, 07:00 PM -
Diablo sport tuner or hypertech tuner.........
By clg82 in forum Firebird / WS6Replies: 12Last Post: 04-21-2007, 09:29 AM -
Difference in Stock Ram Air intake and other aftermarket intake
By WS6-cobra killer in forum Firebird / WS6Replies: 5Last Post: 01-15-2007, 06:47 AM
Bookmarks