Results 1 to 17 of 17
Thread: where to buy rear end
-
03-03-2009, 09:51 AM #1
- Join Date
- Jun 2008
- Location
- ohio
- Posts
- 393
black- 1998 Camaro SS
where to buy rear end
Do any of you guys know where to buy a 12 bolt or 9" rear end at a good price? what is the best to go with for a 98 ss m6 with around 480rwhp? should it be full spool, truloc, trutrac, detroit locker. im pretty confused about wha the difference is between them and aslo what gear to get. its a daily driver so something like 3.89 gears?
-
03-03-2009, 02:52 PM #2
Contact our new sponsor fast toys. They have the best price that I've found.
http://fasttoys.net/shop/product_inf...roducts_id=110
-
03-05-2009, 02:26 PM #3
- Join Date
- Jun 2007
- Location
- Lathrop, Missouri
- Posts
- 2,482
NBM / Silver- 00 SS / 71 SS Elcamino
Quick Performance Raceing on ebay will beat anyones price hands down. Great folks and Had my custom built Hybrid 9" (Strange Pro Nodular third member, 35 splined moser axles and houseing, detroit locker with motive performance 4.30 gears) on my doorstep 5 business days after ordering. + my gears are QUIET!!!!
2000 SS Camaro Heads, Large cam, Fast 90, 9"w/430's and locker, yada yada yada... you get the picture
1971 SS ElCamino 402 Big Block 550HP
2006 Silverado 2500HD 496 cubic inches of pure muscle
-
03-05-2009, 02:53 PM #4
- Join Date
- Feb 2006
- Location
- U. S And A Greatest country in all of world
- Posts
- 3,384
Stock- 2002 Camaro
Check with KYSpeed. They have awsome prices!!!
-
03-07-2009, 10:28 AM #5
-
03-07-2009, 01:18 PM #6
They are Very good to deal with!! High quality and un beatable price.
I have gotten 6-8 different 9" rears from them for 4 different cars.
They'll beat ANY price.
http://stores.ebay.com/Quick-Performance-Racing
You don't see it they will make it for you!
And as Jay also stated you're gears should be quiet!! I don't care what kind of rearend it is or the ratio. A proper set-up ring and pinion shouldn't make noise.Last edited by LS2Tuner; 03-07-2009 at 01:20 PM.
Don't be afraid of the bottle!!! Be afraid of your tune!!!
-
03-08-2009, 05:39 PM #7
i called up moser and had mine made but it was more then going to some of the ls1tech sponsors so after i told them they droped the price but mosere pissed me of missing parts cheep studs and the list goes on and on and on my next rear end will not be a moser
-
03-11-2009, 09:40 AM #8
- Join Date
- Jun 2007
- Location
- Lathrop, Missouri
- Posts
- 2,482
NBM / Silver- 00 SS / 71 SS Elcamino
I got new reluctor rings installed, 5/8" long wheel studs, fill and drain plug, billit 1350 yoke, and everything else mentioned above (Strange Pro nodular third member, solid pinion bushing, Moser case and 35 splined axles, Detroit locker, Motive high performance gears) for $2350 shipped.
You will not find a better deal for a Brand new, made for new f-body, 9" rearend. Beleive me I called just about everyone out there.
-
03-11-2009, 01:54 PM #9
- Join Date
- Feb 2009
- Location
- North Berwick,, ME
- Posts
- 91
Arctic White- 2000 Firebird Formula
I just bought a nine inch from them and I chose to go with their 9" Ford Housing/Axle Package (2000 Firebird)
- Includes Tubular Torque-Arm Bracket
- Includes GM Flush Mount Housing Ends (Allows use of factory brakes)
- Moser Axles, Axle Bearings, Wheel Studs, & Retainers
- 5 on 4-3/4" Bolt Pattern, 1/2" Studs
Strange Nodular Iron S-Case, Iron Daytona Pinion Support, 1350 Steel Yoke, 3.70Motive Performance Gears, 35 Spline Detroit Locker, & Timken Bearings. I have to say the price was better than I expected.
-
03-14-2009, 11:11 AM #10
- Join Date
- Jun 2008
- Location
- ohio
- Posts
- 393
black- 1998 Camaro SS
what did you pay for yours driftpin?
-
03-14-2009, 11:16 AM #11
- Join Date
- Feb 2009
- Location
- North Berwick,, ME
- Posts
- 91
Arctic White- 2000 Firebird Formula
$2415
-
03-14-2009, 11:20 AM #12
- Join Date
- Feb 2009
- Location
- North Berwick,, ME
- Posts
- 91
Arctic White- 2000 Firebird Formula
the basic set up for up to 500hp was $1975 but I chose to go with a bit heavier duty case and axles. Probably overkill but...oh well.
-
03-14-2009, 11:29 AM #13
-
03-14-2009, 12:04 PM #14
- Join Date
- Feb 2009
- Location
- North Berwick,, ME
- Posts
- 91
Arctic White- 2000 Firebird Formula
That's what I was thinking. Ive seen too many people at the track try to launch be blow their rearends out. I've been lucky so far it hasn't happened to me. I think I'm going to hold on to this car for awhile so it's going to see a lot of trips down the 1/4 mile.
-
03-14-2009, 12:13 PM #15
That's exactly how I'd do it!
-
03-14-2009, 12:14 PM #16
Did you purchase your built rear right off of one of their auctions or did you call them up and work it out that way?
-
03-14-2009, 02:45 PM #17
- Join Date
- Feb 2009
- Location
- North Berwick,, ME
- Posts
- 91
Arctic White- 2000 Firebird Formula
I called up and had them build it to my specs. Great customer service so far.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rear LS1 98-02 Rear Disc Backing Plates/Calipers/Brackets
By peetsjunkie in forum Parts Wanted / TradeReplies: 2Last Post: 10-02-2007, 08:53 AM -
Rear alignment is off after Koni/!= rear isolator lowering, car pulls to right, specs
By anestech* in forum Suspension and HandlingReplies: 13Last Post: 07-08-2007, 09:42 AM -
Rear alignment issues after removing rear spring isolaters, adj trac bar fix it?
By anestech* in forum Suspension and HandlingReplies: 1Last Post: 06-19-2007, 07:06 PM -
Randy's Rear End Shop Get's Punked (Prank) - Woman looking for a bigger rear!
By powermelissa in forum Multimedia SectionReplies: 0Last Post: 05-25-2007, 10:37 AM -
how to remove the rear inside panels, where the rear spkrs are ?
By Eugenio_SS in forum ConvertibleReplies: 4Last Post: 05-19-2006, 04:39 PM
Bookmarks