Results 1 to 5 of 5
Thread: gto rear end
-
08-27-2012, 02:05 PM #1
- Join Date
- May 2012
- Location
- columbus
- Posts
- 21
Impulse Blue Metallic- 2004 GTO
gto rear end
What rpms should I be at if I have a stock rear end? Here's some pics I took.
Thanks guys!
-
08-27-2012, 02:05 PM #2
- Join Date
- May 2012
- Location
- columbus
- Posts
- 21
Impulse Blue Metallic- 2004 GTO
Btw Its an 04 a4
-
11-05-2012, 05:01 AM #3
- Join Date
- Oct 2012
- Location
- ardmore oklahoma
- Posts
- 121
yellow- 2004 pontiac gto
has to be! my 04 m6 at 70 is at 1800 rpm. 80 at a little over 2000rpm.
-
11-07-2012, 07:48 PM #4
There are online calculators to tell you what RPM you should be at based on speed, tire size, and your transmission ratio.
A 2004 GTO A4 has the following transmission ratios:
1st gear - 3.06:1
2nd gear - 1.63:1
3rd gear - 1.00:1
4th gear - 0.70:1
Stock rear end ratio for the 04 GTO was 3.46
I don't know what tire size you are running so I cannot calculate it for you. However, stock tire size for your car is a 275/45-17. If you are running this tire size, your car should be right at 2135RPM at 70MPH.
Hope that helps.
-
12-06-2012, 04:46 AM #5
- Join Date
- Oct 2012
- Location
- ardmore oklahoma
- Posts
- 121
yellow- 2004 pontiac gto
245/45/17 on the 04's. i own one and thats what came on it. and all the others i have looked at. the 275 wouldn't make any difference. just a little wider. i ran 275's on mine and had to use spacers and do a inner fender tuck also, or they would rub. and that was with the stock 04 gto wheels.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Rear LS1 98-02 Rear Disc Backing Plates/Calipers/Brackets
By peetsjunkie in forum Parts Wanted / TradeReplies: 2Last Post: 10-02-2007, 08:53 AM -
Rear alignment is off after Koni/!= rear isolator lowering, car pulls to right, specs
By anestech* in forum Suspension and HandlingReplies: 13Last Post: 07-08-2007, 09:42 AM -
Rear alignment issues after removing rear spring isolaters, adj trac bar fix it?
By anestech* in forum Suspension and HandlingReplies: 1Last Post: 06-19-2007, 07:06 PM -
Randy's Rear End Shop Get's Punked (Prank) - Woman looking for a bigger rear!
By powermelissa in forum Multimedia SectionReplies: 0Last Post: 05-25-2007, 10:37 AM -
how to remove the rear inside panels, where the rear spkrs are ?
By Eugenio_SS in forum ConvertibleReplies: 4Last Post: 05-19-2006, 04:39 PM
Bookmarks