does anybody know

[Ramairgod84]

does anyone know where i can find just the line that goes from the master cyl to the slave? the master cylinder i bought didnt come with a new line and mine's leaking bad

[mark21742]

it should be a standard line, I'd check your area for someone that deals in hydralic hoses for forklifts and such

[Ramairgod84]

do u know what size i would need?

[mark21742]

do u know what size i would need?

I have an auto, sorry I don't know

[02Sweet]

if your local gm dealership has the right people working in the parts/service area they can help you with providing you with a blow up of the part you need. With that you should be able to rig something up

[Ramairgod84]

I tried and they said they cant get the part. that it comes with the master cylinder and that's $300

[02Sweet]

I think your best bet is to find someone parting out a car or make it

[Ramairgod84]

well i'd try to make it, but the dealer said its a high pressure hose, and doesnt know what size it is

[beamer4608]

Go to a hydraulic, lift, pump, etc. shop, like above, take them the old hose and tell them you need one just like it. Most big shops make their own hoses.

[Smittro]

Auto parts...

[Hi-Po]

Go to a hydraulic, lift, pump, etc. shop, like above, take them the old hose and tell them you need one just like it. Most big shops make their own hoses.

Yes. If you have the old hose in hand... take it somewhere. If you have a Caterpillar near by, I would start there. If its a decent size place I gurantee they have what you need and will make it for you.

[sunsetorangess]

I ran into the same issue about two years ago on the third gen. We had to order some Braded line and two fittings, im not sure if there the same on the 4th gen, but heres a link to the adapters on for the third..
We order about two feet of line and two adapters and worked perfect and saved the guy about 200 bucks...
http://www.russellperformance.com/mc...dapt_fit.shtml
Hope this helps...
J