Results 1 to 2 of 2
Thread: Correct Speed
-
02-22-2009, 04:07 AM #1
- Join Date
- Jul 2005
- Location
- Pacific Beach //San Diego,Ca,U
- Posts
- 908
White with Black Top- 1999/ Z28
Correct Speed
Right now I have 255X45Zx17 inch with 4:10 gear and my speed reads 75 at 1800 RPM'S // 70 1600 with 26.1 set in the PCM.
Does this sound right?
Any input would we greatly appreciated
Thanks in advance
Bruce/StoreKeeper99Z28
__________________
99Z28/M6/ Pro 5 and Lou's "Short Stick"/ AAP Custom Y Pipe 3"/ 4:10 Gears CMS/ Chrome ZR1 Rims/MMS Aggressor Cam 233/233/578/578/113 lsa/Mac Mid-Lenth Headers/Don lee Auto Ported Throttle Body and Ported LS6 Oil Pump/AAP 6.0L Heads/SLP Dual Cam Roller Chain/MMS Mike Morgan e-Tune,Dyno Tuning.
Dyno: Sept 9,2008
439 RWHP/398 Torque
-
02-22-2009, 08:12 AM #2
Not quite there yet.
http://www.angelfire.com/fl/procrastination/rear.html
I always confirm my setting with a stop watch and cruise set a specific speed and go between 2 mile posts on the interstate. I use 80mph/45 seconds and 60mph/60 seconds.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: Is this is the correct gasket?
By JayTA98 in forum General HelpReplies: 1Last Post: 02-09-2011, 05:28 AM -
am i seeing correct?
By jiveass in forum Almost Anything GoesReplies: 29Last Post: 01-12-2011, 09:24 AM -
Is my speed reading correct (with video)
By smokiechicago1988 in forum General HelpReplies: 2Last Post: 05-05-2009, 02:36 PM -
Is this Price correct
By shanepatrick1230 in forum General HelpReplies: 6Last Post: 03-14-2009, 03:40 PM -
How to correct Camber
By WS6ICK in forum Suspension and HandlingReplies: 9Last Post: 11-25-2005, 04:09 PM
Bookmarks