Results 1 to 20 of 59
Thread: Aftermarket Rear....
-
06-09-2008, 11:46 AM #1
- Join Date
- Apr 2008
- Location
- allenhurst GA
- Posts
- 306
black- 99 formula firebird
Aftermarket Rear....
what is the most absolute bullet proof *gorilla proof* rear end out there for the 98-02 F body...i have blown up my stock 10 bolt 3 damn times now...and am not breakin 400rwhp...heres my list of boo-boos..
1 set bent axles...replaced with moser forged 28 splined
ta girdle installed
2x auburn pro series diffs..grenaded spider gears...
2x sets of 3:73 gears motive and richmond ..grenaded back to stockers..
i will hopefully be making mid 400+numbers hp/tq and with the spray look to be about 700 ish..i need something that is NOT going to $HIT on me...
-
06-09-2008, 11:51 AM #2
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
Moser 9"
-
06-09-2008, 12:04 PM #3
- Join Date
- Apr 2008
- Location
- allenhurst GA
- Posts
- 306
black- 99 formula firebird
what spline axles? what diff? what kind of gears? should i list up my suspention mods too? would that help?
-
06-09-2008, 12:08 PM #4rapter34Guest
m6 go 4.11 I went 31 spline should be pletty. but if your the parinoid type you could get what is it a 40? the higher spline you go the stronger it is but you can't have posi with anything over 31
-
06-09-2008, 12:15 PM #5
-
06-09-2008, 12:20 PM #6
- Join Date
- Apr 2008
- Location
- allenhurst GA
- Posts
- 306
black- 99 formula firebird
i thought the SD60 was the baddest rear out there? and no i will not launch off the bottle..hopefully i can make enough tq down low i wont need to...and the car will be driven on the street too ..so that eliminates the spool
-
06-09-2008, 12:23 PM #7
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
Not a fan of the torque arm mounts on the Dana or the 12 bolt.
If you are launching off the bottle...TruTrac with 31 spline axles.
-
06-09-2008, 12:29 PM #8
- Join Date
- Apr 2008
- Location
- allenhurst GA
- Posts
- 306
black- 99 formula firebird
well so far i am gathering that this would be the best rear...
M9 /with TruTrac/ with 31 spline axles/ 4:10 gears is that gorilla proof?
-
06-09-2008, 12:38 PM #9
rearend
definitley 9 inch with an M6 and a 12 bolt or a 60 for an A4.
-
06-09-2008, 12:38 PM #10rapter34Guest
pretty much for a mostly street car. and it would be 4.11's no big differance but that what the 9" has.
-
06-09-2008, 01:49 PM #11
- Join Date
- Apr 2008
- Location
- allenhurst GA
- Posts
- 306
black- 99 formula firebird
do the M9's come with 3:90 gears? would like to keep some streetabilty right? i am not building a track only warrior here..
-
06-09-2008, 02:15 PM #12
-
06-09-2008, 02:23 PM #13
- Join Date
- Apr 2008
- Location
- allenhurst GA
- Posts
- 306
black- 99 formula firebird
yea i was hoping to keep 85 mph and about 1500 rpms...thats why i got a 6 spd car...maby when i get tick performance to rebuild it they can do something w/ the gearing? w/ the price of gas and the dreams of a power tour........
Last edited by QtrWhore; 06-09-2008 at 02:26 PM.
-
06-09-2008, 03:09 PM #14
-
06-10-2008, 09:40 AM #15
- Join Date
- Apr 2008
- Location
- allenhurst GA
- Posts
- 306
black- 99 formula firebird
will that rear end i listed above hold the hp/tq i am looking to make all motor and then on the juice as well? and what brand of gears would you all recommend?
-
06-10-2008, 09:48 AM #16
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
Do NOT rebuild a 10 bolt.
Moser 9"
It is a complete bolt in rear end.
-
06-10-2008, 11:19 AM #17
I thought there were problems with the Moser torque arm bolts? Or is that just on the 12 bolt?
-
06-10-2008, 11:30 AM #18
- Join Date
- Jan 2006
- Location
- Shepherd, Michigan
- Age
- 36
- Posts
- 11,770
blacker than wesleysnipes- 98' trans am
the new m9's look really nice and i guess their t/a are pretty sweet...look into the m9 or ford 9"
-
06-11-2008, 01:42 AM #19
- Join Date
- Apr 2008
- Location
- allenhurst GA
- Posts
- 306
black- 99 formula firebird
first off..no damn ford parts for my bird..lol...and i have already bulletproofed my damn 10 bolt for the last time..forged axles, girdle, gears, centerchunk...thats why i am shoppin for a different rear now
-
06-11-2008, 06:02 AM #20
- Join Date
- Jan 2006
- Location
- Shepherd, Michigan
- Age
- 36
- Posts
- 11,770
blacker than wesleysnipes- 98' trans am
fair enough...get the m9 then..based off the ford 9" but isnt considered a ford 9"
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Recommended Aftermarket Rear Control Arms
By Suzaku in forum Suspension and HandlingReplies: 17Last Post: 01-19-2011, 05:26 PM -
4th Gen F Body Owners with aftermarket rear ends please enli
By navybluephoenix in forum DrivetrainReplies: 41Last Post: 12-20-2010, 07:25 PM -
WTB aftermarket rear sway bar
By c5z28 in forum Parts For Sale / TradeReplies: 0Last Post: 07-01-2010, 07:23 PM -
Wanted: Looking For A Aftermarket Rear End
By doc78 in forum Parts Wanted / TradeReplies: 0Last Post: 04-23-2008, 10:03 PM -
WTB: Aftermarket Rear Susp.
By LT1Redneck in forum Parts Wanted / TradeReplies: 0Last Post: 01-04-2007, 07:23 PM
Bookmarks