4 channel ABS with a 9"

[One_Bad_TA]

I have a Moser 9" and was throwing an ABS light. I pulled the axles and some of the teeth on the ABS reluctor wheel are a bit chewed up so I need to get new ones. I called the dealer and they do not sell the reluctor wheel seperate from the axle for the 10 bolt.

Does the stock reluctor wheel on the 10 bolt fit on the Moser axles?

I haven't had the axles out in awhile and can't remember if the reluctor wheel was off of my 10 bolt or a Moser part. I just want to make sure that the 10 bolt's reluctor wheel is what is used on the Moser axle so I don't go buying parts I can't use.

[Cutlass]

I think it is the same 10 bolt reluctor on your Moser. I seem to remember reading Pajeff had to press the reluctor off his old 10 bolt axles and onto his moser axles.

[One_Bad_TA]

I think it is the same 10 bolt reluctor on your Moser. I seem to remember reading Pajeff had to press the reluctor off his old 10 bolt axles and onto his moser axles.

Thats what I was thinking too. I guess I will have to find some used axles or something to get that reluctor wheel.

[Demon_Z28]

yea if you can find someone with spare stock axles laying around, you can have them pressed off and used on your axles.

[35th-ANV-SS]

Cutlass is correct. Same reluctor ring.

[pajeff02]

That is correct -- I pressed the stock reluctor rings off my stock axles and onto the Moser axles. Pretty simple to do: