Results 1 to 6 of 6
Thread: 2.73 to 3.42
-
01-20-2009, 12:53 PM #1
- Join Date
- Sep 2008
- Location
- Minnesota
- Posts
- 174
Pewter- 2001 Z28
2.73 to 3.42
I want to put 3.42s in and use my same 2 series carrier, so is the 7.5 and 7 5/8 the same gear or interchangable.
-
01-21-2009, 06:23 AM #2
- Join Date
- Jun 2007
- Location
- Baltimore, MD.
- Posts
- 728
Bright Red- 2000 Pontiac Trans Am WS6
The same.
Just need to make sure that the gears ordered are for a 2 series carrier.
I used some cheapie Summit gears last time I did a gear swap in an F body, and they were surprisingly quiet and easy to setup. For $150 you can't beat them.
For 3.42 gear ratio and a 2 series carrier, you'd need:
http://store.summitracing.com/partde...5&autoview=sku
.2002 Silverado Z71 ECSB HPTuners tuned by yours truly
2000 Pontiac Trans Am WS6 6.0, 4L80E, 9" rear
webpage: http://www.fquick.com/rel3rd/
-
01-21-2009, 07:02 PM #3
- Join Date
- Sep 2008
- Location
- Minnesota
- Posts
- 174
Pewter- 2001 Z28
do you know if the reluctor ring is on the ring gear?
-
01-21-2009, 07:44 PM #4
It should either be on the carrier itself or on the axles depending on if you have traction control or not.
-
01-22-2009, 10:51 AM #5
-
01-22-2009, 11:23 AM #6
- Join Date
- Sep 2008
- Location
- Minnesota
- Posts
- 174
Pewter- 2001 Z28
Thanks for the help guys, I just have one more question I got this part number for a richmond install kit 83-1044-1 and they said it will work for my O1 but it says 82-98.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks