120K mi clutch, press plate, flywheel

**herculesrider1** · 01-16-2019, 06:56 PM

Just pulled the trans and pulled off the clutch pressure plate. Here's what I found. I bought the car in '08 and have put 120,000 miles on this clutch, pressure plate, and flywheel. Is this low wear normal? Should I replace it or reinstall it? I don't have a new disc to compare to, so I really don't know. Anyone's opinion would be appreciated! Thanks!

003.jpg
004.jpg
The first pic is the clutch disc, the second is the pressure plate which still has the ridges in the plate. The flywheel looks the same way with ridges still on the face of the flywheel. What do y'all think? Thanks!

***SMWS6TA*** · 01-17-2019, 07:55 AM

I responded in the other thread but I'll also add here that it looks like your still have a fair amount of material on the clutch that you still have valleys on the clutch material and the material looks to be quite a bit above the rivets.

Depending on your driving you could bet another 35-50k miles IMHO.

**herculesrider1** · 01-17-2019, 09:55 AM

Originally Posted by SMWS6TA

I responded in the other thread but I'll also add here that it looks like your still have a fair amount of material on the clutch that you still have valleys on the clutch material and the material looks to be quite a bit above the rivets.

Depending on your driving you could bet another 35-50k miles IMHO.

Thanks Scott. I never knew clutches could last this long.