My 2007 Turbo Silverado Build

[dozerdan]

Here is my turbo build. It's my 2007 Chevy Silverado. We decided to build this one my factory 5.3 was cratered due to a failed new and "improved" comp 918 valvespring. This was all fabricated by my best friend Tyler Scruggs (nitrous injected) and it really turned out awesome...The frame is very filthy in most of the pictures but it has since been cleaned

The log. Made of 2.5" stainless and an SDPC header flange



Downpipe routed




Coldside Routed




Motor Pics




Picked up some head studs


Installed

[dozerdan]

Had to relocate the coils


Cleaned up






The setup consists of
5.3 motor
02 LS6 cam ground with a 112LSA
LS6 yellow valve springs
Head studs
stock 706 heads
Ebay turbo
3"D.P. to 4" exhaust with 4" dynomax bullet
Meth Kit

I'd really like to run an 11.99 with this truck. I think I'll need bigger injectors to get there though. The stockers on this truck are 35# and it has a bigger fuel pump so it will still be a runner.

Here's a quick rev

[Benner]

That's awesome. What are you hoping for interms of power? Good luck gettin everything worked out.

[dozerdan]

whatever power it takes to run an 11.99...

[JaycenK]

Question, Is it running that single turbo off one bank of the motor or was that pipe on the custom header run around to the other bank?

[dozerdan]

there is a crossover pipe from the drivers side...thanks guys!

[0verkill]

did you look into putting a ls6 intake on it? they are much beter the the truck intake.

[Mean Green Z28]

NICE!!! so much room in there to do shit!

[Chevy-Art]

Nice job, looks good. Like the blue.