Hi all,

Looking at doing a new H/C/Intake setup as a winter project. I think I have my parts list setup and was wondering what I will need as far as new gaskets / bolts / seals, etc.... I know I will need new valve covers, will I also need relocation brackets for the coils?

Fast 90/90
Custom cam grind (somewhere in the 224/228 .6xx/.6xx 112-114LSA)
and the AFR 225 66cc heads.

Looking to hopefully hit 400+ RWHP and have a little more torque down low, right now my cam doesn't really hit until about 4k, I spend most of my time having fun stoplight to stoplight / don't make it to the strip much, so a little more power down low would be nice. Any more advice?