Results 1 to 2 of 2

Video - how to upgrade from stock to LS6 Valve Springs

This is a discussion on Video - how to upgrade from stock to LS6 Valve Springs within the Internal Engine forums, part of the LSx Technical Help Section category; Upgraded to LS6 springs recently as part of my supercharged upgrade. Made a video to share the process....

  1. #1
    Junior Member
    Join Date
    May 2011
    Location
    Lakeland, MN
    Posts
    13

    Metallic DK Blue
    99 Trans AM 6 spd

    Video - how to upgrade from stock to LS6 Valve Springs

    Upgraded to LS6 springs recently as part of my supercharged upgrade. Made a video to share the process.


  2. #2
    Junior Member Lulu Koch's Avatar
    Join Date
    Jan 2023
    Location
    Seattle
    Posts
    3

    Black
    2010 Toyota Camry

    Upgrading from stock to LS6 Valve Springs requires removing the existing valve springs and replacing them with the LS6 springs. The process is relatively straightforward and can be completed in a few steps.

    1. Remove the cylinder head: Unbolt the valve cover, unscrew the spark plug tube seals, and remove the head.

    2. Unscrew the valve spring retainer: Using a valve spring compressor tool, unscrew the valve spring retainer.

    3. Replace the springs: Place the new LS6 springs on the valve seat and reinstall the retainer.

    4. Reinstall the cylinder head: Replace the valve cover, spark plug tube seals, and reassemble the head.

    5. Test the springs: Start the engine and test the springs to make sure they are functioning correctly.

    Following these steps should enable you to upgrade from stock to LS6 valve springs.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Are the stock Ls1 valve springs weak?
    By importssuck in forum Internal Engine
    Replies: 5
    Last Post: 05-03-2012, 06:14 PM
  2. Stock LS1 Valve Springs...
    By OnEbAdReDSS in forum Internal Engine
    Replies: 13
    Last Post: 08-08-2008, 02:17 PM
  3. New valve springs w/stock cam question
    By rel3rd in forum Internal Engine
    Replies: 3
    Last Post: 08-15-2007, 01:56 PM
  4. STock Valve Springs
    By redss454 in forum Internal Engine
    Replies: 6
    Last Post: 03-27-2007, 04:45 PM
  5. Stock valve springs?
    By rnl35thss in forum Internal Engine
    Replies: 4
    Last Post: 02-15-2006, 07:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •