Results 1 to 2 of 2

Suggestions? Cams/heads/rockers

This is a discussion on Suggestions? Cams/heads/rockers within the Internal Engine forums, part of the LSx Technical Help Section category; ...

  1. #1
    Junior Member
    Join Date
    Sep 2006

    2000 Trans Am

    Post Suggestions? Cams/heads/rockers

    Hello all, I have a 2000 Trans AM that is stock right now. I just bought some long tube headers and while they were pulling up everything I thought it would be a good time to upgrade the rest. I am going to install the LS6 intake on this as well. I also want to upgrade the heads, cams, and rockers as well to finish it off down there. Just curious on this ad if this should work with my LS1 Trans Am:

    LS1 / LS6 Ported Heads, Cam, Shaft Rockers
    This is a set of LS6 Style heads CNC Ported by Patriot Performance. Stage II 59cc Chambers, 2.02 int 1.57ex Stainless valves with under cut heads, 225cc int 83cc ex Runners, Comp Cams Dual .650 lift springs with titanium retainers, magnesium bronze intake guides, phosphorus bronze exhaust guides 5 angle machined hardened seats. For center bolt valve covers. Ideal for 346 to 382 cid engines with 2200-6000 RPM power band. We’ve used this set up on a stock bottom ended LS1 and made 580 HP at 6200 RPM. This also includes a Lunati Hyd Roller Cam (See specs in photo) plus Patriot Performance Shaft mount roller Rocker Arm Kit which are made from 6061 Aluminum. The 1.7 ratio rocker arms can handle aggressive hydraulic or solid roller cams ( require a valve cover spacer for clearance)

    Will this work with my stock trans am, just wanted to make sure before I bought it. Also what kind of horsepower can you expect from this setup, also adding the LS6 intake and Longtube headers as well?

  2. #2
    member since may 2000 nhraformula's Avatar
    Join Date
    Dec 2002
    n/w chicago

    2000 nhra edition formula

    whats the cam specs.
    long tubes, heads and cam will get you a 100 rear whell horsepower bump and more depending on cam.
    2000 nhra edition formula
    a few bolt ons, 379 rwhp
    11.96 @113.25

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chevy 496 Comp Cams Roller Rockers & Valvespring U
    By Ed Blown Vert in forum Camaro / SS
    Replies: 0
    Last Post: 01-11-2010, 09:40 AM
  2. MDS Ignition, Comp Cams Roller Rockers & Holley Ca
    By Ed Blown Vert in forum Camaro / SS
    Replies: 2
    Last Post: 08-05-2009, 10:08 AM
  3. Comp Cams Ultra-Gold Roller Rockers Install - CHP
    By Ed Blown Vert in forum Camaro / SS
    Replies: 0
    Last Post: 01-05-2009, 09:50 PM
  4. Comp Cams Roller Rockers: Noise?
    By Three cams short in forum Internal Engine
    Replies: 5
    Last Post: 11-04-2005, 03:42 AM
  5. Crane Cams 1.8 LS1 Rockers
    By WS SICK in forum Parts For Sale / Trade
    Replies: 1
    Last Post: 08-15-2005, 05:19 PM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts