ported heads

**RedHot99T/A** · 02-28-2011, 05:29 AM

So I'm thinking of getting my heads a 3 angle valve job done,ik a local porter who will do this for me for 175 both heads....is this worth it?I think the heads are 241casting or 243 castings....off of a 02 ss......I'm putting an ms4 in the car so wondering if the valve job would be safe for that big of a cam?

**02Sweet** · 03-10-2011, 11:49 AM

Originally Posted by RedHot99T/A

So I'm thinking of getting my heads a 3 angle valve job done,ik a local porter who will do this for me for 175 both heads....is this worth it?I think the heads are 241casting or 243 castings....off of a 02 ss......I'm putting an ms4 in the car so wondering if the valve job would be safe for that big of a cam?

That is VERY cheap! I would be careful with the ms4 b/c of the high lift. It will clear stock but if the head is milled you may run into ptv issues.

**RedHot99T/A** · 03-11-2011, 01:54 PM

Mmm yea he's not milling them just port/polish/3angle valve job....seen a pic looks amazing!

**MrKid** · 03-13-2011, 04:45 AM

That's a damn good price! As for clearance, you should be fine. I had to go with the MS3, only because I had oversized valves put in my LS6 heads. Stock valves should be fine.