Results 1 to 10 of 10
Thread: need help with cam(of course)
-
10-09-2005, 08:23 PM #1
- Join Date
- Sep 2005
- Location
- tulsa
- Age
- 42
- Posts
- 90
pewter- 2000 z28 camaro
need help with cam(of course)
ok, my car is 2000 z28 with a stage 3 4l60e, tci 3500, lt headers, true duals w/xpipe. the car currently has 2.73's but i am going to 3.73's in the next week or two. the car is not a daily driver, but it is driven on the street and at the track. the car made 321rwhp and 335rwtq with the current set up (well before the stall and trans, but the stock trans was slipping a little) i want to get as close to or over 400rwhp and rwtq. what would be a good cam to run with this? maybe one that would run well with a 100hp shot of nitrous later on? maybe!?
-
10-09-2005, 08:59 PM #2
I think it will be hard to get the 400rwhp with the stall but the track times will make you happy.
I have heard the Magic Stick from TSP is good with nitrous and would sound mean with the TD'sMike Berry
2000 TransAm WS6 A4
ASC#6552
-
10-09-2005, 10:08 PM #3
depends on how big of a cam that you want......do you want power below the curve or just peak horsepower.....do you have stock intake? How aggressive of a cam can you tolerate? do you have emmissions to worry about?
-
10-09-2005, 10:57 PM #4
berry.......what type of cam do you have? Is it seriously cam only, if it is I would guess that you have a large cam with those numbers.......
-
10-10-2005, 01:51 AM #5
Berry is gonna end up like me 490rwhp 510 ft lb trq with h/c only
-
10-10-2005, 05:43 AM #6
- Join Date
- Aug 2005
- Location
- Commerce Ga
- Age
- 47
- Posts
- 4,994
Black, Blue- 07 TBSS, 07 GSXR1000
I just went with the Comp Cam Extreme 232/234 595/598 on a 112LSA. With my mods they say I should be close to 400 rwhp. I guess I will have to wait and see the actual dyno numbers. Love the sound of it.
3 inch Chambered Catback.
-
10-10-2005, 09:48 AM #7BlackHawk T/AGuest
You may lose your low end...your peak power with that cam is going to be 6600 at least so you'll have to rev the crap out of it to make those numbers.
-
10-10-2005, 10:22 AM #8
- Join Date
- Aug 2005
- Location
- Commerce Ga
- Age
- 47
- Posts
- 4,994
Black, Blue- 07 TBSS, 07 GSXR1000
Rpm range on the cam is 2400-7200. Where is the lose on low end there?
-
10-10-2005, 09:24 PM #9
- Join Date
- Sep 2005
- Location
- tulsa
- Age
- 42
- Posts
- 90
pewter- 2000 z28 camaro
Originally Posted by Liquifire
-
10-11-2005, 04:14 PM #10
- Join Date
- Dec 2002
- Location
- n/w chicago
- Age
- 54
- Posts
- 6,932
black- 2000 nhra edition formula
peak power isnt what you realy want, its under the curve that counts.
2000 nhra edition formula
a few bolt ons, 379 rwhp
11.96 @113.25
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks