LS2 swap!

[98redconv]

Hi guys, i have some questions that are kinda technical and any info would really help me out. I am building an LS2 for my 98 Z28 and just have a few things to sort out. Since the LS2 cam does not use an incorporated reluctor ring, will my LS1 computer be able to read the signal from the LS2 sensor if i use the correct type of cam sprocket with the raised bar on the one side? I believe some company may make an adapter for the ls2 sensor? And does anyone know where i can get some stock-type flat top pistons for a .005 or .010 overbore that will retain the nice 10.9:1 compression?

[mark21742]

I do remember reading about an adapter somwhere, but sorry I can't remember where. maybe try doing a search for it.

as for the pistons, just about any company that makes pistons offer (over bore) pistons that will give you just what you want. I'm kinda personal to Summit Racing, give them a call and they will hook you up....might even know about the sensor

[98redconv]

Ok, thanks ill give it a try. I mean i know they offer performance pistons but many do not use the stock rods, and they often lower the compression