Results 1 to 9 of 9
Thread: Intake centerlobe?
-
07-14-2008, 11:17 AM #1rapter34Guest
Intake centerlobe?
what is Intake centerlobe on a cam? is it the +1 thing?
Thanks
-
07-14-2008, 11:54 AM #2rapter34Guest
come on where all those cam gods?
-
07-14-2008, 02:50 PM #3
I beleive you mean... lobe centerline.
This is the point of maximum lift on a cam lobe. Measured by recording number of degree's the crankshaft turn's PAST TDC until the lifter reaches its maximum lift.
Centerline of a lobe is usually used for a reference point when degreeing the camshaft. Hope thats enough caus eits all I got.
-
07-14-2008, 06:52 PM #4rapter34Guest
here look under LSA on the options.
http://www.texas-speed.com/shop/item...d=898&catid=44
-
07-15-2008, 10:11 AM #5rapter34Guest
-
07-16-2008, 05:56 AM #6rapter34Guest
anyone?
-
07-17-2008, 04:11 PM #7
- Join Date
- Oct 2005
- Location
- RI
- Posts
- 165
Mag Red- 2002 Vette
Rather then do a lot of typing, here is an article written by David Vizard. He explains things very well and also has a couple of books, one specifically on cams and valve trains. It should hopefully provide you with some good background information.
David Vizard's Cam Article
-
07-17-2008, 07:31 PM #8rapter34Guest
thank you very much!
-
07-18-2008, 03:49 AM #9
- Join Date
- Oct 2005
- Location
- RI
- Posts
- 165
Mag Red- 2002 Vette
You're welcome. His book is excellent too, although it was written for the small block. He provides a lot explanations of cam parameters and their affects on performance. Book is available on Amazon: Link to David Vizards book
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BBK SSI Intake, vs Holley Intake, vs LS6 intake, vs PP 96mm
By Lunatikgixxer in forum External EngineReplies: 26Last Post: 02-28-2017, 10:39 AM -
Question: HOW TO: Swap stock intake with LS6 intake
By thechad125 in forum General HelpReplies: 18Last Post: 02-26-2013, 03:17 AM -
LS6 intake manifold and 227 Intake runners
By IT_SS in forum Internal EngineReplies: 4Last Post: 07-07-2009, 02:11 PM -
Single Plane Intake VS Stock PP Intake
By xzaero0 in forum Forced InductionReplies: 1Last Post: 11-27-2007, 07:00 PM -
Difference in Stock Ram Air intake and other aftermarket intake
By WS6-cobra killer in forum Firebird / WS6Replies: 5Last Post: 01-15-2007, 06:47 AM
Members who have read this thread: 0
There are no members to list at the moment.
Bookmarks