Results 1 to 20 of 25
Thread: doing cam this weekend
-
01-14-2010, 03:56 AM #1
doing cam this weekend
Well guys doing my cam this weekend. I got all my stuff to do it. I Got the ms3 cam PAC 1518 springs, harland sharp rockers (1.7), ls2 chain all the gaskets, an push rods. I hope it goes good an hope it runs better. Wish me luck! I keep ya posted
-
01-14-2010, 04:05 AM #2
Good luck! Post up if you have any questions. I'm sure you know this website, but just in case ill post it anyway. WWW.ls1howto.com
370 CI - Twin 6766 Turbo - Jakes stage 5 4L80E - MWC 9" - Holley Dominator
Build in progress...
-
01-14-2010, 04:22 AM #3
Alright man will do an thanks
-
01-14-2010, 06:06 AM #4
Should be better weather this weekend, I hope. When do you plan on starting it? I have to spend some time with the family, but I can stop out and give you a hand and bring some tools
-
01-14-2010, 07:55 AM #5
-
01-14-2010, 07:59 AM #6
- Join Date
- Jun 2009
- Location
- Saint Louis, MO
- Posts
- 1,705
Arctic White & Black- '98 WS6 M6 - SWAPTIME!
have fun
-
01-14-2010, 08:12 AM #7
-
01-14-2010, 08:36 AM #8
-
01-14-2010, 08:49 AM #9
-
01-14-2010, 08:54 AM #10
-
01-14-2010, 09:21 AM #11
-
01-14-2010, 09:38 AM #12
Are you swapping the timing chain? If so what is the new chain?
-
01-14-2010, 09:51 AM #13
Nevermind, just reread, is the ls2 chain a double roller?
It a PITA to get the pump bolt out and back in without dropping it in the pan... You will need my magnet to catch it, and if its a wider chain than stock, need to bend the pickup tube to match the new pump postion with the shims.
Also do you have an air compressor?
Lol hell you want to just come over and do this in my garage, I'll charge you a pizza
-
01-14-2010, 10:31 AM #14
-
01-14-2010, 11:33 AM #15
- Join Date
- Oct 2007
- Location
- NC
- Posts
- 635
SOM- 1998 T.A.
-
01-14-2010, 11:46 AM #16
haha i got everything trust me lol
-
01-14-2010, 12:52 PM #17
-
01-14-2010, 06:29 PM #18
lol yea we all do
-
01-15-2010, 08:48 PM #19
Hey man nice meeting you tonight, once you get that bolt out and back in in the pickup tube the rest will be cake! If you have any problems get me a call.
When you start taking that bolt out lay the magnet down under/ near it... You will drop it, the key is to catch it lol
-
01-27-2010, 10:18 PM #20
Well, how did it go????? It's been a week since your last post....Did all go well???? If so how does it sound???? Any stalling/mechanical issues???? Let us know if you had any problems so we can help......
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
had an 08 c6 for the weekend
By imprtkillr2810 in forum Almost Anything GoesReplies: 40Last Post: 10-17-2008, 04:15 PM -
Z28 vs Evo going down this weekend
By foit3 in forum Kill StoriesReplies: 20Last Post: 04-09-2006, 05:51 PM
Bookmarks