Results 1 to 14 of 14
Thread: To build or not to build
-
12-25-2011, 09:43 AM #1
To build or not to build
Hey Guys and Gals,
I recently broke my 2000 SS M6 racing another Camaro. Stats about my car as of now. Everything in engine/tranny, rear, and exhaust is stock. They have close to 90k miles on them. I currently have a Blackwing airlid on it, subframe connects, a strutower brace, and an MGW short throw shifter. Originally I had wrist pin noise but now I have the dreaded bottom end noise :'( I was wondering if it makes sense to rip it all apart and build it up or just sell it how it is. Recently bought the car and this shit happened. My dad is telling me to just cut it and take a loss. My question is, how much does bottom end noise take off the value of a car(general ball park if possible). How much would it be to build rotating assembly and cam it and do it up(general ballpark)?
Keep in mind that I would be having a shop do all the work unfortunatelly.
It's a decision I can't seem to make....such a crappy situation.
BTW this was my DD and now I'm driving a 97 camary with 400k on the clock
-
12-25-2011, 10:24 AM #2
Trade you my 99 auto SS lol
Sent from my DROIDX using Tapatalk
-
12-25-2011, 10:27 AM #3
Mine just needs some tlc cosmetically on the interior seats and belts replaced
Sent from my DROIDX using Tapatalk
-
12-25-2011, 10:28 AM #4
I want a m6
Sent from my DROIDX using Tapatalk
-
12-25-2011, 11:09 AM #5
- Join Date
- Feb 2010
- Location
- north bay california
- Age
- 34
- Posts
- 2,973
Black- 00 camaro ss M6 #6695
If u like the car, if it looks good and everything. Fix it.
Buy a used motor, port the heads, get a cam. You'll be happy.
Or if u got the money. Rebuild the engine with good parts,
I'm
Sure is not going to be cheap.
-
12-25-2011, 05:48 PM #6
I would simply drop a short block in it if they are still available. How is your oil pressure?
-
12-26-2011, 09:02 AM #7
-
12-26-2011, 10:27 AM #8
These prices are taken from hawks for a full drop in crate engine ls1 $6171 ls6 $6566 ls3 $8855. An ls3 would require aditional parts for the swap but not sure on exactly what. Also you could talk to texas speed for under $4000 you can get a short block from them and reuse you heads and such or get a long block for $6740. I would call Texas speed if I was you and talk to them to see what all they would recomend, pluse see if there are any speed shops around and ask them what they think.
-
12-26-2011, 10:28 AM #9
Scoggin Dickey LS1/LS6 short block for $3,695 - Scoggin Dickey Parts Center SDLS6SB347SP - 346ci LS1 / LS6 Budget Series Short Block Assembly | SDParts - 1-800-456-0211
-
12-26-2011, 04:23 PM #10
Going to be hard to sell if it has issues unless you are willing to take a hit on it.
Fixing it is more money too. Tough call.
You have to decide if you really want to keep it, because by the time you go through the expense of an engine you generally won't get that money back out of it if you sell, especially a 4th gen F-body this day and age.
I'd shop around for either a used low mile replacement engine or possibly a rebuilt short block from any number of suppliers like Jeff mentioned.
Personally, I like the 6.0 truck engines. They can be found in the $1,000-$1500 range complete with relatively low miles. Easy swap with just a couple of extension harnesses for the knock and cam sensor.
-
12-28-2011, 06:06 PM #11
Or you can just buy my car for 4600 and have everything you need, for less than a motor will cost you, 4600 if you pick it up, 5000 if I deliver, give or take a few depending on your location
Sent from my DROIDX using Tapatalk
-
12-29-2011, 07:49 PM #12
- Join Date
- Apr 2010
- Location
- hawaii
- Posts
- 117
black- 2001 camaro ss
like previously stated a knocking engine is hard to sell. After hearing 3,4,5,8k for engines, 4600$ for new car, i would buy a forged rotating assy and get it in the car about 3k-3500$ and be happy. i just spent 2500 on a callies forged 383cid rotating assembly. the post about the hard decision to build or sell leads me to believe your fond of it. if need be take out a small loan and make it better than it was.
-
12-30-2011, 12:10 PM #13
- Join Date
- Nov 1999
- Location
- over here...
- Age
- 45
- Posts
- 25,709
[]D [] []V[] []D- 1999 trans am
don't even bother to rebuild the engine...
buy a 402 block and build that up on a budget build...
-
12-30-2011, 12:28 PM #14
I lean towards Spaz's idea. I personally like the truck blocks, and they can be built for cheap with a stroker assembly. Start with an advantageous 4" bore, and a cast iron block can be bored multiple times.
To make things even easier, Texas Speed offers a short block 402/408 based off of what I mentioned, assembled and ready to go fairly cheap ($4000 range). Throw the heads and cam of your choice at it and you can easily have a 500hp engine with gobs of torque. It's really the best bang for your buck when you look at other crate engines out there. The $3400 LS6 crate engines seem to be long gone now.
The LQ4/LQ9 based stroker is the route I'm taking when the time comes since the LS6 isn't available.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
78 LS1 TA build
By reedld in forum LSx Retrofit and SwapReplies: 6Last Post: 07-11-2014, 06:41 PM -
440 LSX build
By cam02ss in forum Camaro / SSReplies: 9Last Post: 07-01-2013, 03:55 AM -
78 LS1 TA build
By reedld in forum Classic MuscleReplies: 2Last Post: 04-23-2013, 07:40 PM -
Hot Rod Mag LS1 build
By racingrev in forum Camaro / SSReplies: 2Last Post: 09-01-2010, 09:39 AM -
500CI Chevy LS1 Engine Build - How To Build A 500C
By Ed Blown Vert in forum Camaro / SSReplies: 0Last Post: 02-17-2009, 07:10 PM
Bookmarks