Results 1 to 16 of 16
Thread: 400 wheel HP
-
07-24-2006, 10:15 PM #101pewterls1Guest
400 wheel HP
Ive got a 01 ws6 currently dynoed at 330 to the wheels...i have LT headers w/ 3" true duals...whisper lid and a KN...taylor race wires and NGK plugs..ive also got sfc lcas phb and a centerforce clutch w/ lightened flywheel...it does pretty good now but i was planning on getting a cam soon...i wanna get real close to the 400 wheel hp mark if not hit it...i dont need like anything w/ a smooth idol...ill prolly drive it close to everyday but i can deal w/ a rough idle so long as it doesnt die all the time...a friend of mine has all the similiar mods in his 00 trans am but hes got a cam...hes got a really big cam too...232/230 somewhere just below .60 on lift and 110 LSA he made 371 to the wheels now thats alot but to me it seems he should make more...and it has been tuned.. but i see some on here w/ smaller cams and bigger power...he also has a y pipe and borla exhaust no cats...dont know if that makes a diff or not...anyhow any input helps thanks a ton...any cam specs you suggest would help..and other needed mods to hit that 400 hp mark!
-
07-24-2006, 10:29 PM #2
- Join Date
- Mar 2006
- Location
- WI
- Posts
- 5,085
- Blog Entries
- 1
09 EclipseGT 75 Chevy 4x4- 2001 Trans-Am 13 F-XT
A good set of heads would do the trick or close to it.
-
07-24-2006, 10:52 PM #3
You'de probably free up some power with a good tune since you got LT's then you'll know exactly how far you need to go. H/C should get you there. I have a spray set up I haven't installed. That is where I'm going to get my 400mark. A 75 shot should suffice.
04 C5 A4 Torch Red - sold
2009 CTS4 Ice Black - sold
2013 1500 Silverado Z71 - sold
02 Z/28 M6 Onyx Black All Options - Sold
2014 Caddy CTS4 - DD
2016 Silverado 2500HD
2020 Caddy XT6
2020 2SS Vert
-
07-25-2006, 10:13 AM #4
- Join Date
- Aug 2003
- Location
- Honolulu HI
- Age
- 41
- Posts
- 2,486
Pewter- all bore 370 Trans Am
does your friend have a ls6 intake? with that cam, he should've hit it unless he dyno'd on a mustang dyno or the tune is pretty shitty. A few questions first:
What is the car going to be used for?
Where do you want your power?
Will it be full bolt on?
Are you going to be using heads?
How much are you looking to spend?
How is it going to be tuned?
-
07-25-2006, 08:19 PM #501pewterls1Guest
im lookin to drive it everyday or like 3 or 4 days a week...i have an s10 to drive but i dont ever drive it cause i got the ta haha...but i just want it for a 90% street car w/ occasional track visit on the weekends...im not able to afford heads at the time but i was hopin i could hit it 400 w/ the cam since i got 330 w/ and untuned lt header engine...i thought there may be a cam out there that i could get like 50 or 60 wheel hp w/ if not i guess ill settle for less cause i dont have a choice...but i just want a real stout car w/ a nice hard cammin sound at idle haha...anyway thanks for the help
-
07-25-2006, 08:20 PM #601pewterls1Guest
ps...ill also be gettin it tuned on a dyno...i know a place w/ a dyno and a wide band a/f...so they can tune it...
-
07-25-2006, 09:04 PM #7
- Join Date
- Jun 2006
- Location
- Bakersfield, California
- Posts
- 152
red- 1959 corvette
magic stick gaurantees 60+ rwhp but its pretty rough, might stall
-
07-25-2006, 09:40 PM #8
T-rex cam is one of the best gainers but you will be gaining a lot of HP at the top of the curve but poor numbers accross the curve........Good peak numbers but poor averages. If that is your only goal that you care about to hit 400 then as far as cams go the bigger the better.
-
07-26-2006, 04:53 AM #9
A rough idle means it will probably stall lol. If you go with a moderate heads/cam package you can get 4000 easy and still run smooth... yea, wait till tune until after wards.
-
07-26-2006, 07:35 AM #1001pewterls1Guest
my friends doesnt stall...it has b4 but not regularly...i dont care if im backing out of a spot and it stalls...im just sayin i dont wanna have to keep it alive at a stop light...and i cant afford heads so thats not an option...just want a cam...and i think the T-Rex is a little aggressive for me
-
07-26-2006, 09:37 AM #11
- Join Date
- Aug 2003
- Location
- Honolulu HI
- Age
- 41
- Posts
- 2,486
Pewter- all bore 370 Trans Am
then its gonna be tough..i mean, it can be done, but sometimes they just come up short. If you want lope, power, and good driveability, Id look at the new f13 but get it ground on a 110+1 or the new tsp torquer v.3 cam. I dont know the advertised duration so I cant figure out what the DCR for either cam would be. Either cam should get you close if not there. If you have a good tuner, then you shouldnt have any driveablity issues..or at least not too many
-
07-26-2006, 01:47 PM #12
- Join Date
- Jul 2006
- Location
- Lafayette/Indy, IN
- Age
- 40
- Posts
- 19
Rally Red- 2000 Camaro Z28
with my Lid, ported T/B, LS6 intake, G5X2 cam, kook LT, single 4: exhaust I am looking at 400 at the rear wheels. I am dynoing it this weekend. I had it tuned off the dyno to get alot of my drivability issues worked out. coming up here in a month or 2 I should be getting a bigger cam and my fast 90/90 too so I am going to shoot for 440.
-
07-28-2006, 01:51 PM #13
- Join Date
- May 2006
- Location
- England but from TX
- Posts
- 803
Light Pewter Metallic- 2K Camaro Z28
You should go all bolt ons then cam... You don't have a pulley/P&P TB, that's about 10-15 rwhp combined.
-
07-28-2006, 01:57 PM #14
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
Screw Dyno numbers. How quick you wanna be is the question. Bigger cams often have crap for low end grunt. You may go thumpa thumpa and sound bad and have 2+ second 60' times due no torque.
But OK
Heads/Cam/Intake/TB w/ what you already have and a good tuner can get you right there.
-
07-28-2006, 03:10 PM #15
- Join Date
- Jun 2006
- Location
- bay area california
- Posts
- 321
black on black on black- 02 z28
what about the ms3 camshaft..ive heard with a 12 bolt you can launch high enough to get a 1.5 60 foot or better with a 410 gearset....but do you need to launch at the rpm the cam is designed for..like 3000 rpm...will it still get a bad 60 foot time then...or are we looking at street launch performance..cuz i want a big cam but not if it actually makes me slower..and all you a4 guys say youll get me out the hole...im a danm good driver with my m6..would this cam make up for itself up high..or would it get me smoked off the line too hard to put cars on someone with a more torqey cam
-
07-29-2006, 07:20 PM #16
- Join Date
- Apr 2006
- Location
- East Palestine, OH - USA
- Posts
- 117
SOM- 2002 Chevrolet Camaro Z28
Cam and bolt ons got me to 399RWHP
http://www.ls1tech.com/forums/showthread.php?t=476349
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
July 2012 High Performance Pontiac Wheel Guide - HPP Wheel G
By Ed Blown Vert in forum Firebird / WS6Replies: 0Last Post: 05-11-2012, 07:50 PM -
ss camaro zr1 wheel vs replica wheel
By SS-Power in forum Wheels and TiresReplies: 4Last Post: 11-18-2010, 07:01 PM -
Help: New wheel poll related to old wheel poll... VOTE!!
By architect7 in forum Wheels and TiresReplies: 5Last Post: 04-08-2009, 08:45 PM -
2-wheel vs. 4-wheel Alignment?
By jcws6 in forum Suspension and HandlingReplies: 7Last Post: 09-01-2007, 07:42 PM
Members who have read this thread: 0
There are no members to list at the moment.
Bookmarks