Results 1 to 2 of 2
Thread: 317 heads
-
07-16-2008, 11:51 PM #1
317 heads
are the 317 heads found on an iron block 6.0 any good? i can get the whole engine for cheap is it worth it. would it be a good platform for a stroker build? does anyone know the stats on the heads?
-
07-17-2008, 02:06 PM #2
Good platform for a stroker. Is it LQ4 or LQ9 block. Doesnt really matter if you are planning on immediately to rip the internals out and put a 4in stroker in there.
If not, LQ4 has dished pistons with a lower compression ratio around 9.4 or 5
LQ9 has flat top pistons and has a compression ratio of around 10.4 I believe. If you are turning it to a stroker, then you are probably planning on getting new heads anyway right?
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Late-Model GTO Heads and Cam - The Voice Inside Our Heads, P
By Ed Blown Vert in forum GTOReplies: 0Last Post: 03-16-2011, 09:30 AM -
Late-Model GTO Heads and Cam - The Voice Inside Our Heads
By Ed Blown Vert in forum GTOReplies: 0Last Post: 02-04-2011, 02:00 PM -
AFR heads VS. Ported and beefed up stock heads.
By hutcher04 in forum Internal EngineReplies: 10Last Post: 03-14-2010, 08:27 AM -
New Heads or Port/Polish Stock Heads?
By Black02LS1 in forum Internal EngineReplies: 32Last Post: 06-22-2007, 11:29 PM
Bookmarks