I recently upgraded the suspension in my 2000 TA with BMR lowering springs, control arm relocation brackets, control arms, panhard rod, sway bars and torque arm. The car sits 2Ē lowered on the passenger rear regardless of what I do. I called BMR and on their recommendation, I loosened all the bolts with poly bushings and then greased and torqued it all with load with the same results. Iíve since removed the rear springs and shocks and replaced them with QA1 coilovers. I moved the spring perch on the passenger side 2-3 inches higher than the drivers side and it hasnít helped at all. Drivers side sits 27.25Ē and passenger side is at 25.25Ē. Any help is appreciated. Car has never been hit and is a super clean 12k mile TA