Needed Assistance Lowering

[1slowbusa]

Ok so I want to lower my car and BMR is having a sale on springs and koni shocks right now.
1993 - 2002 F-Body | Handling Performance Packages | HPP025 - Level 2 Koni Handling Performance Package | BMR Suspension - The Leader in High Performance Suspension & Chassis

I already have a suspension technology front sway bar.

I plan on also ordering the Pan Hard Bar
1993 - 2002 F-Body | Panhard Rods | MPHR002 - Panhard Rod, Chrome Moly, On-car Adjustable, Polyurethane Bushings | BMR Suspension - The Leader in High Performance Suspension & Chassis

Rear Sway Bar
1993 - 2002 F-Body | Sway Bar Kits | SB003 - Sway Bar Kit With Bushings, Rear, Hollow 25mm | BMR Suspension - The Leader in High Performance Suspension & Chassis

And control arm relocation brackets.
1993 - 2002 F-Body | Control Arm Relocation Brackets | CAB002 - Control Arm Relocation Brackets, Bolt-on | BMR Suspension - The Leader in High Performance Suspension & Chassis



Is this all that is needed to complete everything the right way?

[Deviant LS1]

That should be all of it.

[c5z28]

The 25mm rear bar is for drag racing, if you want a more autox/road race friendly setup the 21 or 22 is a more popular choice. At the time I lowered my car it had 18" wheels on it. The drop sucked the rear wheel in and I had to get adjustable lower control arms to push it back in the center. If you want lca's I would get one with a heim or roto joint on one end to keep the suspension from binding.
The correct way is a matter of what you want the car to do and how deep your pockets are.