Koni SA Settings / Your Opinions!!!

**architect7** · 07-16-2008, 01:03 PM

Hey all- after 2 months of backorder time, I've finally received my Koni SA's and am installing them tomorrow. Please, anyone that has them, tell me what setting you use and what you like/dislike about your setting.

Thanks again for the help.

**Mr. Luos** · 07-16-2008, 01:09 PM

Springs?

**architect7** · 07-16-2008, 01:20 PM

I have the Hotchkis springs. Mild 1" drop.

**Mr. Luos** · 07-16-2008, 01:28 PM

Start at 5 sweeps from soft on the front, and full soft on the rear.

**architect7** · 07-16-2008, 01:34 PM

Originally Posted by Mr. Luos

Start at 5 sweeps from soft on the front, and full soft on the rear.

so even with the softer setting on the front and full soft on the rear, it will still have much better handling than the decarbons?

**frisco88** · 07-16-2008, 01:53 PM

major difference the car stays planted,mine were done last week with strano springs

**architect7** · 07-16-2008, 02:08 PM

Originally Posted by frisco88

major difference the car stays planted,mine were done last week with strano springs

awesome. what settings have you tried out? thanks.

**architect7** · 07-16-2008, 02:44 PM

what alignment specs should I use? I don't see a lot of information regarding this.

**frisco88** · 07-16-2008, 02:52 PM

I'm using the same settings as Mr.Luos suggested,it seems to be a good starting place.
wheel alignment,
camber: -0.5
castor: +4.5 (stock)
toe: 0
This is what i was told to use by Eugenio a very knowledgeable moderater,seems to turn very easily at the touch of my steering but not too skittish,and supposedly good on tire wear