How to set or adjust LCA's

[TerribleTed]

So I have sphoon adjustable LCA's on,,,I know need to know what the proper method is for setting there lengths on what I will call a 2000 Z28 that is stock.

[DaddySS]

You basically want to center the axle in the wheel wells and square to vehicle/front wheels. I could be wrong so wait for posts from others in the know.

[35th-ANV-SS]

The stock length, hole to hole, is 19-3/8". You can start there and see how your wheel looks in the wheel well. The above post is pretty much correct though. Your wheel should be centered in the wheel well.

[sjsingle1]

the arms are shipped at the stock lenght....so for a stock car.........no need to chsnge

[camaross1]

thats why they make a tape measure, take the time to measure, then you know your correct, if you have to adjust, then do so and tighten down the lock nut, and ,done