Front tube chassis 98-02 F-body

**Nasty TA** · 07-22-2007, 08:14 AM

I'm looking for a front tube chasis for a 98-02 F-body. If anyone knows where i can get one or who makes one please let me know. Trying not to build it my self but i will if i have to.
Thanks

**Eugenio_SS** · 07-23-2007, 04:21 AM

if you mean the k-member... i'd go w/ UMI.

**mrr23** · 07-23-2007, 04:51 AM

if you mean replacing the stock k-member and arms with tubular components, then yes there are a few manufacturers.

i have the BMR stuff on mine

**third_shift|studios** · 07-23-2007, 08:54 AM

that's HOT!

**SexOnWheels** · 07-23-2007, 02:21 PM

How are the tubular components (specifically) the front LCA's holding up for the two mods who have posted in this thread?

I have read about breakage before so I went with the LG arms and am wondering if I was just paranoid as any steering component breaking on the track would be scary!:

**Nasty TA** · 07-23-2007, 02:53 PM

No i don't need a k-menber i want an entire front tube chasis like you can buy for novas, cameros, chevelles, ect. The entire front end. Going to use fiberglass front clip over it want to run bigblock in the car.

**mrr23** · 07-23-2007, 02:56 PM

Originally Posted by SexOnWheels

How are the tubular components (specifically) the front LCA's holding up for the two mods who have posted in this thread?

i only have 1900 miles on mine right now.

**third_shift|studios** · 07-24-2007, 05:00 AM

Originally Posted by SexOnWheels

How are the tubular components (specifically) the front LCA's holding up for the two mods who have posted in this thread?

I have read about breakage before so I went with the LG arms and am wondering if I was just paranoid as any steering component breaking on the track would be scary!: