Results 1 to 3 of 3
Thread: ES End Link Question.....
-
02-27-2012, 05:12 PM #1
ES End Link Question.....
I bought ES 9.8118R end links for my SS. This is the one ES shows for the application.
The center section of the ES parts is 2 7/8 (per chart) while the end links I took out are ~ 2.3 ".
I have Sportline springs, is it possible the previous owner put in shorter end links to compensate for the lower ride height?
If so, should I get the ES kit closest in this measurement to what I took out?
Thanks!
Jon
-
03-09-2012, 10:38 AM #2
- Join Date
- Jan 2009
- Location
- Pa
- Posts
- 137
-
03-09-2012, 07:31 PM #3
Would 1/2" make that big a difference to worry about?
Sent from Motorola ATRIX 4G on Tapatalk2000 T/A-DMH Cutout, SLP Cold Air kit, FTRA/SLP Upgrade, SLP Bilstein, LT1 Eibach ProKit, Kuhmo PA31 Tires ,SLP Fan Switch, UMI Double Adj PHB w/ Roto-Joints, UMI LCARB, Strano 35/22mm Sway Bars , Magnecor KV85 Wires, Hurst Shifter, Lou's Short Stick.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Got my Watts Link
By tatertot91 in forum Suspension and HandlingReplies: 30Last Post: 10-05-2012, 08:12 PM -
How to link 2 laptops together?
By Firebird Phoenix in forum Almost Anything GoesReplies: 4Last Post: 06-05-2008, 08:23 PM -
4 link?
By lrader99 in forum Suspension and HandlingReplies: 1Last Post: 08-20-2006, 09:18 PM -
A link I ran across
By Black_Z28 in forum Almost Anything GoesReplies: 6Last Post: 05-05-2006, 03:13 PM
Bookmarks