Results 1 to 17 of 17
  1. #1
    Senior Member karpetcm's Avatar
    Join Date
    Oct 2008
    Location
    Tujunga, CA
    Posts
    1,646

    White
    01 Camaro 6speed

    Body after suspension

    Well ive noticed this alot and since i dont drive the car much it doesnt bug me as much as it should. Ever since putting on Eibach pro kits and the car came with bilstein shocks the car feels like the body front to back and side to side flexes or each corner goes up and down or does its own thing. Its really hard to explain correctly but if it was a framed car it feels like the frame bends in every corner as if there is soo much load on any one corner even in light driving. The shocks and springs work great it recovers really well, goes into corners excellent and very little body roll although i would still like sway bars.

    It feels like to me and would be the best guess i could come up with that it needs SFC's badly. Making the suspension stiffer has multiplied the effects of how badly the car needs SFC's and Sway bars and torque arm, lol. I noticed this on my stock 01 SS i had a few years back when it was brand new. Did the same exact thing, most of it on that car went away with KYB cheap shocks gas adjust and sportline springs but still somewhat had that body bending thing going on but wasnt as bad guessing it was a brand new car.
    1993 Z28 M6: K&N Intake, 52mm TB, TB Bypass, No Cats, Exhaust Cutout, Flowmaster Muffler, 3.90 Gears, 160 Thermo, Tune, BMR Springs, Bilstein Shocks, 3 Point SFC,s & MGW Shifter.

  2. #2
    Member
    Join Date
    Dec 2005
    Location
    Cedar Rpaids,IA
    Age
    44
    Posts
    354

    Red
    1998 Camaro SS

    It’s a Fbody and SFCs should really be your first mod!!
    With your mods you are applying even more cornering gforces on the car and it’s really in need of SFCs if you don't want to get dents from the body flexing
    1998 Camaro SS Hard Coupe Bright Red #1593
    Mods: Lots!!, still my daily driver except for winter
    383rwhp 370rwft/lbs

    1979 Corvette
    Mods Lots!!, weekend cruiser
    325rwhp and 320rwft/lbs

    2007 Dodge Ram 1500 4x4 (Yes its got a HEMI)
    Mods: Catback, BFI CAI, Winter daily driver

  3. #3
    Senior Member karpetcm's Avatar
    Join Date
    Oct 2008
    Location
    Tujunga, CA
    Posts
    1,646

    White
    01 Camaro 6speed

    ^^^ im gonna have to do SFC's. Its really way more noticable now after my spring install and its just weird when driving. Even during hard acceleration the body feels funny like it bends or flexes too much, especially going WOT and changing lanes feels the worst.

  4. #4
    Firebird Encyclopedia 9T8W66's Avatar
    Join Date
    Oct 2006
    Location
    St. Clair Shores. Michigan
    Age
    55
    Posts
    1,602

    Navy Blue Metallic
    `98 Formula M6 HdTp

    IDK
    I did Springs Shocks and Swaybars (Strano/Koni) last year on my car and it feels 100% better then when it was new. It currently sits at 131K miles and the chassis isn't flexing anymore then before. If anything the car feels more solid and planted.
    Craig
    Semi Retired Street Racer
    2012 Lava Red Mustang GT Coupe Brembo/3.73's
    Build Date 3/17/11, Last Lava Red GT

    Gone but not forgoten
    NBM `98 Formula M6 HdTp
    1 of 1 Build Date 3/12/98

  5. #5
    Senior Member Carlos01SS's Avatar
    Join Date
    Aug 2003
    Location
    Cypress, CA.
    Age
    65
    Posts
    2,390

    Black
    2001 Camaro SS

    Truly, SFC's aren't necessary on the 4th-gen f-bodies.
    3rd-gen, now that's different.
    The 4th-gens have a pretty stiff unibody. You could and it would tighten things up but you can also do that with aftermarket swaybars, but then again, I'm talking about making a 4th-gen into a canyon carver.

    Swaybars wouldn't be detrimental for the 1/4 mile, okay, a larger rear swaybar for better traction, then SFC's would be a good thing.

    For the twisties, SFC's arent' necessary.

    I don't know if he's still a sponsor here, but theres stranoparts.com, Sam Strano's place, that guy has won I think 3 NATIONAL AUTOCROSS CHAMPIONSHIPS within the past 6 years in a 4th-gen f-body and he doesn't have SFC's, never used them, THAT says something.

    All he's got is Koni's, his own Strano springs, his own Strano swaybars, an aggressive front wheel alignment, a couple of other aftermarket parts and there you go, he's beat everyone else out there including STI's, EVO 7's 8's & 9's, Miata's, you name it, he's beat them.
    The Black 2001 SS #5697
    T-tops, 6-spd/B&M ripper, ARH LT's/GMMG/CME, Volant, Koni DA's & GC coilovers, Strano frt & rear sways, G2(SFC's w/v-braces, STB, adj PHR), Wilwood 6-piston red calipers frnt brakes w/13" 2-pc rotors, RKSport(clear front & rear corners, c-f grill), chrome Z06 wheels

  6. #6
    Member wenn_du_weinst's Avatar
    Join Date
    Aug 2008
    Location
    South Dakota
    Posts
    198
    they are necessary if you like your car and want it to stay nice with no tweaking of the body and to keep all the rattles and squeaks down

  7. #7
    Junior Member coprod's Avatar
    Join Date
    Apr 2009
    Location
    Texas
    Posts
    5

    Red
    1997 Trans Am Convertible

    Sorry, but what are SFC'S

    I have a 1997 Trans Am, that has Eibach lowering springs on it. I would like it a bit taller, but not stock.

    Are stock WS6 springs taller than the Eibachs?

    Thanks

    Richard

  8. #8
    Member cmb570's Avatar
    Join Date
    Jun 2006
    Location
    Fort Mill, SC
    Age
    54
    Posts
    219
    SFC = Sub Frame Connectors

  9. #9
    Junior Member coprod's Avatar
    Join Date
    Apr 2009
    Location
    Texas
    Posts
    5

    Red
    1997 Trans Am Convertible

    Man that was too easy,,,brain not working today...thanks

    I will post my question as its own post...Thanks

  10. #10
    Senior Member karpetcm's Avatar
    Join Date
    Oct 2008
    Location
    Tujunga, CA
    Posts
    1,646

    White
    01 Camaro 6speed

    The body twisting is really bad, i dont know if its a combination of both putting on wider and stickier tires out back so when i take off puts alot of strain on the body because i can easily tell it bends and twists when i go WOT in 1st or 2nd and especially changing lanes WOT to pass someone is the worst. Also the other thing would be the eibach springs that caused it as well stiffening up the car magnifying how much flex the body has. The shock and spring combo i have no complaints at all, the car handles really well recovers from dips and bumps very quickly and has a very small amount of body roll but hardly noticable. Just this twisting is more pronounced on this 01 LS1 then it ever was on my other camaoro's and ive had 5 of them, lol.

  11. #11
    Senior Member Carlos01SS's Avatar
    Join Date
    Aug 2003
    Location
    Cypress, CA.
    Age
    65
    Posts
    2,390

    Black
    2001 Camaro SS

    Quote Originally Posted by karpetcm View Post
    The body twisting is really bad, i dont know if its a combination of both putting on wider and stickier tires out back so when i take off puts alot of strain on the body because i can easily tell it bends and twists when i go WOT in 1st or 2nd and especially changing lanes WOT to pass someone is the worst. Also the other thing would be the eibach springs that caused it as well stiffening up the car magnifying how much flex the body has. The shock and spring combo i have no complaints at all, the car handles really well recovers from dips and bumps very quickly and has a very small amount of body roll but hardly noticable. Just this twisting is more pronounced on this 01 LS1 then it ever was on my other camaoro's and ive had 5 of them, lol.

    Well you know what, even though Sam Strano would swear on the bible that SFC's aren't necessary, that doesn't mean that folks still don't add them on their cars.

    I got SFC's on my car, and it did make a noticeable improvement.

    You'll also hear the peeps with SFC's SWEAR that the weld-in SFC's would be the ones you would want to buy and others will SWEAR to you that their bolt-in SFC's are freaking outstanding too.

    Good luck with whatever you do.

  12. #12
    Senior Member Carlos01SS's Avatar
    Join Date
    Aug 2003
    Location
    Cypress, CA.
    Age
    65
    Posts
    2,390

    Black
    2001 Camaro SS

    I'm thinking that, if you want a better handler then you need to get front & rear swaybars cuz well, you know, they greatly reduce body "sway", isn't that what you are trying to lessen/eliminate???

  13. #13
    Senior Member karpetcm's Avatar
    Join Date
    Oct 2008
    Location
    Tujunga, CA
    Posts
    1,646

    White
    01 Camaro 6speed

    well im gonna definilty get the sway bars either way, ive had sway bars on all 4 of my past camaro's and will on this one as well. All have been strano up front and 21mm 1le rear. But this time im just gonna do front and rear strano's.

  14. #14
    Member blk99ws6ta's Avatar
    Join Date
    Jul 2007
    Location
    Palestine,Il
    Posts
    164

    Black
    1999 WS6 Ram Air Trans-Am

    I had the same problem. When you wiggle the steering wheel going down the road the ass-end would float around. I bought koni shocks, and what a change!!!! I have the hose mod w/shocks. It lowers it about 3/4". It tighten me up abunch. I just couldn't belive the difference. I'm really pleased with what I did.
    And yes, e-mail www.stranoparts.com or call 814-849-3417. Sam he will help you out. He helped me.

  15. #15
    Member
    Join Date
    Dec 2007
    Location
    Brookville, PA
    Posts
    547

    White
    2001 Z28

    FWIW, I sell SFC's... and I don't in any way think they are bad things. They don't hurt the car, or the performance, and can help if the chassis is pretty worn down. The older the car, and the longer it was on stock dampers, the more SFC's help becuase the uni-body is that much more tired.

  16. #16
    King 0f n00bz shady milkman's Avatar
    Join Date
    Jan 2006
    Location
    Shepherd, Michigan
    Age
    36
    Posts
    11,770

    blacker than wesleysnipes
    98' trans am

    i am pretty sure that those rear quarter fender dents are caused by wheel hop...sfc will tighten things up and help with squeeks and rattles...i love my umi 3 points...and i am glad i added them..has a much more flat and tight feeling when i take corners or do anything with elevation..feels tied together

  17. #17
    Member
    Join Date
    Dec 2007
    Location
    Brookville, PA
    Posts
    547

    White
    2001 Z28

    Quarter panel dents are caused by hop, both on acceleration and braking. SFC's do nothing to prevent them. We've seen them form on cars after SFC's were installed, and not at all on cars that aren't driven that hard without SFC's.

    Again, I'm not anti-SFC. It's just that they are often used as band-aid to suspension issues.
    Sam Strano
    SCCA National Champion (x6)
    SCCA ProSolo Class Champion (x5)
    2009 SCCA ProSolo Overall Champion
    Owner--Strano Performance Parts
    814-849-3450

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Front Suspension Work / Completed Rear Suspension
    By bhunter0830 in forum Suspension and Handling
    Replies: 32
    Last Post: 07-02-2013, 01:23 PM
  2. Front Suspension Work / Completed Rear Suspension
    By bhunter0830 in forum Suspension and Handling
    Replies: 0
    Last Post: 04-13-2013, 05:44 AM
  3. Chris Alston's Chassisworks Gstreet Suspension - A-Body Acce
    By Ed Blown Vert in forum Camaro / SS
    Replies: 0
    Last Post: 02-21-2012, 01:40 PM
  4. 1967 Pontiac Firebird Suspension Upgrade - Suspension Ascension
    By Ed Blown Vert in forum Firebird / WS6
    Replies: 0
    Last Post: 01-17-2008, 04:50 PM
  5. Independent Rear Suspension of F-body's
    By 5.7 Reasons in forum Suspension and Handling
    Replies: 20
    Last Post: 12-01-2005, 08:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •