Results 1 to 9 of 9
-
09-27-2005, 08:19 PM #1
- Join Date
- Sep 2005
- Location
- MIchigan
- Age
- 40
- Posts
- 182
Navy Blue Metallic- 2000 Camaro SS
When will the rear go with a 6 speed??
I've been doin small things to my SS lately and i've been thinkin of putting drag radials out back to get better launchs. It's got a SLP MAF, cold air induct, and 4.10's, Soon to be gettin long tubes and possible heads and intake. now I do go to the track every so often and afteri put the 410 in it slowed down my ET but about 2 tenths and my mph went up about 5 mph so i'am gunna put on drag radials i've heard that with a 6spd it will blow the rear end out???
-
09-29-2005, 07:21 AM #2
Why did your car slow down with the 4.10s? Was it a traction problem?The stock rear-end will work for a while-depends on how hard you launch.
-
10-02-2005, 05:08 PM #3
- Join Date
- Sep 2005
- Location
- MIchigan
- Age
- 40
- Posts
- 182
Navy Blue Metallic- 2000 Camaro SS
yeah you could say i had traction problems,I had a friend video tape the runs and all the way down the track you could see the car sway back and forth about 6-8 inches and when i shift it's alot more, it picked up my MPH alot but i could not get out of the hole and second was almost sideways
-
10-02-2005, 06:59 PM #4
- Join Date
- Aug 2005
- Location
- New Mexico...from Kansas City
- Age
- 44
- Posts
- 330
Black- 2001 Camaro Z28
4.10s have smaller teeth than the stock 3.42s. When people switcht to the 4.10s on a stock rear it usually seems that they break the gear set quite a bit more often than other parts.
-
10-02-2005, 07:37 PM #5
Ditch that 10 bolt now before it breaks.
-
10-03-2005, 12:45 PM #6
With Drag radials and 4.10s in your stock rear you'd better have a toe truck standing by
-
10-06-2005, 02:26 PM #7
- Join Date
- Sep 2005
- Location
- MIchigan
- Age
- 40
- Posts
- 182
Navy Blue Metallic- 2000 Camaro SS
hmmmmmm kind of what i was figurein well i guess i'll run it till i pull it or blow it out, thanks for the info
-
10-07-2005, 06:30 AM #8
If you dont launch above 2 grand you will probably be ok, but def put a 12 bolt or even a ford 9'' in soon, i recomend a ford 9'', bulletproof
-
10-09-2005, 03:02 PM #9
- Join Date
- Aug 2005
- Location
- THE SWAMP
- Posts
- 1,446
Light Pewter Metallic- 2000 Camaro SS M6
Originally Posted by SLP00blueSS
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wanted: left rear ABS speed sensor for 01 WS6 A4 W/ trac
By Willfully Armed in forum Parts Wanted / TradeReplies: 7Last Post: 05-05-2016, 03:06 AM -
Help: noise from rear at high speed
By sbarin76 in forum DrivetrainReplies: 0Last Post: 11-15-2009, 07:26 PM -
Slow speed thump/rattle from left rear
By Fred H. in forum Suspension and HandlingReplies: 22Last Post: 05-17-2008, 01:32 PM -
1996 T/A 6 speed/rear end questions,
By fordwhupper in forum Manual TransmissionReplies: 1Last Post: 03-14-2007, 04:09 AM -
Just installed rear end off a 6 speed
By shady1504 in forum DrivetrainReplies: 2Last Post: 12-31-2005, 06:45 PM
Bookmarks