Results 1 to 1 of 1
Thread: What clutch should i go with
-
10-12-2011, 09:43 PM #1
- Join Date
- Jul 2011
- Location
- mo.
- Posts
- 15
pewter- 2001 Z-28
What clutch should i go with
This is my first post so not sure how it goes,but here it goes. my clutch needs replaced, going to go all new and try to do so on a budget.My thoughts are a G.M. master cylinder and 01 and up slave cylinder,pilot bearing and rear main. Here is where i get stuck. I was just going to turn and balance the flywheel and go with a Spec stage 2 clutch.But have read all kinds of diff. things from not being very good to they chatter. The car is an 01 Z-28 with 66k on it,basic bolt ons full exhaust and tune,not much.it sees some street racing but not much else. only future mods will be a 228 or torqure 2 cam,that will be later.I dont wont to have to replace the clutch again for a while. I also have been looking into the Ram and LS7 clutch also,but i will have to replace the flywheel with the LS7. Any wise advice would be excellent.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
New Disc Clutch System News - What's New In Clutch
By Ed Blown Vert in forum Almost Anything GoesReplies: 0Last Post: 04-27-2010, 05:44 AM -
Had Clutch slave cyl, clutch master cyl, and Clutch kit installed now I got problems
By 7camaro7 in forum Manual TransmissionReplies: 21Last Post: 12-13-2007, 07:41 PM -
Tranny, Clutch, or Clutch Hydraulic System?
By IZNUTHN in forum Manual TransmissionReplies: 2Last Post: 07-31-2007, 06:13 PM -
clutch locks up 1st gear in traffic while riding clutch
By Trixter in forum Manual TransmissionReplies: 9Last Post: 04-22-2007, 09:01 AM -
z06 clutch for sale, pressure plate clutch disk and flywheel
By themack56 in forum Parts For Sale / TradeReplies: 2Last Post: 07-06-2006, 07:15 PM
Bookmarks