Results 1 to 1 of 1
Thread: Missing 13mm bolts in shifter!
-
06-15-2011, 12:06 PM #1
- Join Date
- Aug 2005
- Location
- North Las Vegas
- Age
- 56
- Posts
- 234
Pewter- 2002 Z28 M6
Missing 13mm bolts in shifter!
So my shifter has been sloppy for a long time.
I was putzing with it in my driveway, pulled up, and the shifter came off! Not good, obviously. Fed it back into the boot, and felt around until I got it back on the shaft.
So... Questions:
How long are the bolts, so I can go to Home Depot and pick some up?
Do I need to take the entire console out to remove/replace the boot and put bolts in?
Tips/advice welcome.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: HELP! Missing head on couple bolts on stock exhaust manifold
By chuckstop00 in forum General HelpReplies: 9Last Post: 07-08-2013, 02:39 AM -
Need advice on new shifter: Missing 3rd!
By Gohard in forum Manual TransmissionReplies: 18Last Post: 08-07-2010, 04:15 PM -
What shifter is this? Missing spring/caps ?
By eddielb in forum Western MembersReplies: 16Last Post: 03-28-2010, 06:01 PM -
Question: Pro 5.0 shifter bolts
By RollingD in forum General HelpReplies: 2Last Post: 10-10-2009, 10:55 PM -
intake bolts and shifter cable
By joejenkinsglass in forum Parts Wanted / TradeReplies: 3Last Post: 01-25-2008, 08:03 PM
Bookmarks