Results 1 to 20 of 26
-
09-25-2010, 02:57 PM #1
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
Master Cylinder for a Monster Clutch
is the RAM adjustible master cylider good?
I am replacing my factory clutch with a Moster Clutch Stage 3(premium package/steel flywheel) in my 99 WS6 and so i need some info on the drill mod too..Last edited by Cutlass; 09-26-2010 at 04:37 AM. Reason: removed non-sponsor direct links
-
09-25-2010, 07:16 PM #2
the tick is a better master from all the reviews.
Thanks,
Mark
also they are $299 shipped.
I can also get you a monster and am a sponsor on here as well.
Thanks,
Mark
KYSpeed.com | FREE SHIPPING & HANDLING | PRICE MATCH | EMAIL
Kook's | American Racing Headers | Vararam | HallTech | Textralia | SPEC | McLeod | Raptor | Trick Flow | AFR | ECS
| FAST | APS | TTi | Procharger | RPM Transmission | Comp | DMH | HP Tuners | PFADT | SLP | STS
-
09-26-2010, 04:38 AM #3
-
09-26-2010, 09:37 AM #4
Tick Master FTW. It's a great, quality part and easy to install. Don't forget the speed bleeder! The Tick speed bleeder is a must install. It'll make your life SOOOO much easier.
2000 Pontiac Firehawk #0041 of 742
-
09-26-2010, 10:13 AM #5
- Join Date
- Sep 2010
- Location
- WI
- Posts
- 129
- 2000 Trans Am
Tick MC here as well. Solved alot of headaches for me.
-
09-26-2010, 07:03 PM #6
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
forgive my lack of knowledge...whats the purpose of a speed bleeder?
and how much will those run me?
mark-i understand that im probably annoying you with all of this uncertainty. but i got two tickets last week and this is messing with my pocketbook...so im trying to figure the list of parts i can get while still being able to afford insurance.Last edited by BashamWS6; 09-26-2010 at 07:06 PM.
-
09-26-2010, 07:08 PM #7
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
and forgive me Cutlass...
i thought they were a sponsor
-
09-27-2010, 03:20 AM #8
- Join Date
- Apr 2008
- Location
- Madison, WI
- Posts
- 7,006
1999 Formula WS6 M6-sold- 2001 Silverado Z71
No problem. No hard feelings here.
The speed bleeder is suppose to may bleeding the air out of the hydraulics easier because it is easier to access the remotely mounted bleeder screw. However, IMHO its is far easier to use a mity vac to bleed the system through the reservoir.
The Speed Bleeder would make it easier to flush the hydraulic fluid clean because it is easier to access. You do have to remove the transmission to install the Speed Bleeder
So it up to you to decide whether you want one or not.
-
09-27-2010, 05:55 AM #9
- Join Date
- Sep 2010
- Location
- WI
- Posts
- 129
- 2000 Trans Am
They actually dont want you to use a mity vac on tick master cylinders. They pull air at a much lower vaccuum. I think a conventional bleed is all they say you should do. With that said I bench bleed first, hook it all up, conventional bleed, and then apply the mity vac with low vaccuum (~7).
-
09-27-2010, 06:28 AM #10
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
-
09-27-2010, 08:05 AM #11
- Join Date
- Sep 2010
- Location
- WI
- Posts
- 129
- 2000 Trans Am
Conventional bleeding? Just when its in the car and you pump it up with the pedal and then crack the bleeder. Obviously theres more to it than that but its a bit lengthy to type. Im betting if you did a search you would find some good stuff on it. If you get a Tick MC it has instructions with it too.
-
09-27-2010, 08:17 AM #12
-
09-27-2010, 12:32 PM #13
I'm confused- aren't you replacing the clutch? You have to drop the trans to get the clutch replaced so why not just install the speed bleeder while you have it down?
-
09-27-2010, 01:03 PM #14
- Join Date
- Sep 2010
- Location
- WI
- Posts
- 129
- 2000 Trans Am
-
09-27-2010, 05:46 PM #15
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
well i was going to let a mechanic do the clutch and do the tick mc myself. i dont really trust myself with that kind of work.. but now that it occured to me that im a dumbass..
thanks for pointing out my teenage stupidity lol
-
09-28-2010, 06:40 PM #16
Hell, if you can do the tick, you can do a clutch. The hardest part is pulling the transmission and putting it back in- really sucks when you're doing it by yourself! Get a buddy to help and get all your parts together- it's really not all that bad. Take your time and don't try to rush it.
I learned how to fix cars by buying a 1970 Chevelle that everything broke on. You'd be amazed how fast you'll learn when you're sitting on the side of the interstate trying to trace electrical issues while trucks soar by and the rain is pouring down!
Good luck!
-
09-29-2010, 06:59 PM #17
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
ahh thanks for the these inspiring words to help me with my confidence...
lol well. i was actually considering about buying a 97 TA with a bent rod.. looked sharp and i was considering it for a project car. but after looking around...i found a bunch a semifinished Chevelles and Monte Carlos and Camaros and Firebirds etc. and i would like to see what all i can teach myself...its amazing what all ive learned from this site...
sometimes ppl make me feel like an idiot (and sometimes i am) but its all a possibility. my dads quite a help. so i might just see if he wants to spent a saturday tearing my car apart.
-
09-29-2010, 07:10 PM #18
Some of the best times I've had with my dad have been working in the garage. I'm 35 and still love going to my dad's shop and work with him. He taught me the most important lesson ever when it comes to fixing stuff:
I had a motorcycle that I had custom painted and while admiring the art I said "There's no way I could do that." When my dad asked why I couldn't have done it I told him "Because I'd screw it up." His answer: "It's only paint. You strip it down and start over."
Don't be afraid of screwing something up as long as you understand you're the one who has to fix it! Almost the entire clutch swap can be summed up as a simple take bolts out, swap out new parts, put bolts back in. When you look at it that way it's not near as intimidating a job! Read through some of the forum posts and make sure you are aware of the "gotcha's" like what a pain removing the pilot bearing is (hint: get a dremel and grind out notches at 9 and 3 o'clock so that it'll come out). And don't be afraid to ask questions!
-
09-29-2010, 07:28 PM #19
- Join Date
- Apr 2010
- Location
- IN
- Posts
- 2,148
now thats inspiration. next weekend im replacing half of the interior and buy christmas i plan to have it all wraped/painted/replaced. figured i should start simple...real simple...
the exhaust...ive never have had to weld anything in my life so...i figure welding $1000 pipes isnt the best way to learn. and my dad says he isnt much better. but i might see if hell wanna help me put in a clutch kit, MC, Speedbleeder and a Pro 5.0.
Surely i can manage the SLP Air Lid (yes i kno you have to heat it to fit it in the...MAF i believe) in only 30-45...maybe an hour for my noob ass
-
09-29-2010, 08:00 PM #20
- Join Date
- Sep 2010
- Location
- WI
- Posts
- 129
- 2000 Trans Am
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Clutch Master Cylinder
By johnfin in forum Firebird / WS6Replies: 1Last Post: 07-21-2012, 05:37 PM -
Help: Clutch Master Cylinder
By gigs02ws6 in forum Manual TransmissionReplies: 1Last Post: 08-24-2010, 03:40 PM -
How to know when clutch master cylinder is going
By JehalinTA in forum Manual TransmissionReplies: 17Last Post: 06-24-2009, 04:24 AM -
Where To By Clutch Master Cylinder
By silverjess in forum Manual TransmissionReplies: 14Last Post: 06-18-2009, 09:35 AM -
which clutch master cylinder?
By cdorch in forum Manual TransmissionReplies: 0Last Post: 05-29-2008, 01:58 PM
Bookmarks