i need some answers

[k-hobbs-ws6]

I'm gettin ready to put an ls7 clutch and flywheel in my 00 ta is that all I need for it to fit and work correctly. Also will an 01 slave cylinder go right on a 00 with no problems

[ls1camino]

I'm gettin ready to put an ls7 clutch and flywheel in my 00 ta is that all I need for it to fit and work correctly. Also will an 01 slave cylinder go right on a 00 with no problems

Do you have the alignment tool?

Are you not replacing the Master Cylinder?

Stock replacement Slave Cylinder? You shuold be fine as long as it's an F-body slave...Vette slaves are different.

[SMWS6TA]

this and have enough beer for the buddy that you need to help you.

are you doing it on a lift or in your garage and on jack stands?

[k-hobbs-ws6]

On a lift and ill get an alignment afterwards

[marksls1ta]

The slave will work no problem. The clutch and ls2 flywheel is what you will need.

The alignment tool is what keep the clutch disc centered in between the pressure plate and flywheel.

Thanks,
Mark

[k-hobbs-ws6]

I'm sure my buddy has one he puts a lot of clutches in but do all u think an ls7 clutch is good

[Cutlass]

the LS7 clutch is a pretty good clutch from what I hear.

[02sunsetorangeZ]

ls7 clutch will be fine unless your making 500+rwhp. Go ahead and get new master cylinder and do the drill mod.

[k-hobbs-ws6]

Wat is the drill mod and how do u do it

[02sunsetorangeZ]

http://www.installuniversity.com/ins...r_cylinder.htm

this is gonna help you take master off and explain the drill mod, me and my brother put an ls7 clutch in last week and i replaced the slave but not the master and my master blew this weekend so i say go ahead and do it.