Results 1 to 4 of 4
-
03-07-2007, 03:00 PM #1
- Join Date
- May 2006
- Location
- Colorado
- Age
- 37
- Posts
- 114
Red- '99 Firebird Trans Am WS6
I need help, and fast! Clutch/Transmission problems.
1999 Pontiac Firebird T/A WS6
Ok, here is the story:
My clutch and/or transmission is going bad, so I go to a shop and they say that the clutch is bad. "OK, I can deal with that". I ordered a SPEC stage 3 clutch kit from lmperformance.com and took the clutch and car to a different shop that my sister's boyfriend knew about. After a few hours of them having the car, they call and say that the clutch will not work because the flywheel needs to be balanced with the clutch plate. (wouldn't any legitimate shop be able to do this???) So, being the idiot that I am, got suckered into buying their clutch (a Luk Performance clutch, I have no idea what the quality of it is, so if anyone has opinions please let me know). They installed the clutch and I get the car back, it's fine when I shift first through fourth, but 5th will pop out of gear just driving down the road, and 6th sticks into gear. I physically have to punch (or palm-heel) the shifter to get it out of 6th gear. It also grinds a tiny bit going into fourth, but it still goes into gear. Has anyone heard of problems with balancing flywheels with the clutch plate? Will the Spec clutch work in my car? (http://www.lmperformance.com/3479/1.html)
Any help would be great, since I would like to get it done as soon as possible, and I only have 30 days to return the clutch if need be.
-
03-07-2007, 04:23 PM #2
- Join Date
- Nov 2006
- Location
- Ipswich UK
- Age
- 53
- Posts
- 28
black- 1999 trans am ws6
did they replace the slave cylinder? sounds like the clutch is dragging try shifting the box with the engine not running and see if you still have same problem!
If you do box the box is donkey poo
If you dont take it back!!
-
03-07-2007, 04:30 PM #3
- Join Date
- Nov 2006
- Location
- Ipswich UK
- Age
- 53
- Posts
- 28
black- 1999 trans am ws6
i always change flywheel (its thin and doesnt take much resurfacing as the hotspots tend to be to deep) with the clutch. The luk clutch is standard in a z06 and comes with a flywheel. I fitted one in my supercharged T/a and its been ok so far. The luk clutch comes with instructions on balancing the flywheel its not to the plate, its to the crank.
hope this helps
neal
-
03-07-2007, 06:01 PM #4
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: Transmission problems.
By schug93 in forum General HelpReplies: 8Last Post: 10-30-2011, 06:38 PM -
Transmission problems
By gstdsm in forum Manual TransmissionReplies: 0Last Post: 04-24-2011, 06:46 PM -
Had Clutch slave cyl, clutch master cyl, and Clutch kit installed now I got problems
By 7camaro7 in forum Manual TransmissionReplies: 21Last Post: 12-13-2007, 07:41 PM -
transmission problems!!
By camarossf650 in forum Manual TransmissionReplies: 7Last Post: 08-27-2007, 12:29 AM -
Clutch or Transmission Problems
By Nero.Jacinth in forum General HelpReplies: 0Last Post: 04-30-2007, 09:25 AM
Bookmarks