Clutch Pedal

[Ghawk996]

I recently purchased a 1998 Pontiac Trans Am and started doing the usually upgrades to the car. I had the clutch upgraded to a Spec Racing Clutch and installed a lightweight 15.5 lb flywheel. Here is the problem this was all done around two months ago and just recently the clutch pedal has been sticking to the floor the car is a six speed by the way. I can pull the pedal back up and it seems to work fine. I havent seen a return spring put I need to inspect it a little more just wanted to know if any one has run into this problem.

[01outlaw]

slave cyl. maybe?

[Ghawk996]

That is what I am thinking and am pissed that I had the clutch but in less than two months ago and spent around a thousand for the whole job since I was in summer school and couldn't make the time to do it. Fu*k!!!

[Mr.Gomez]

try to change the fluid, sometimes, if the fluid is too old, black, that will hapend

[transAMchubby]

read the sticky for this problem

[Ghawk996]

I will look for the sticky

[Ghawk996]

Alright can anyone give me a link to the sticky

[transAMchubby]

look in the drive train section, under manual transmissions

[Ghawk996]

Found the sticky that is going to be alot of help in resolving this issue. I just hope that I don't have to pull the transmission again!

[blatty86]

while ur doin all that invest in an adjustable master cylinder