Results 1 to 4 of 4
Thread: cant shift fast in higher rpms
-
09-24-2010, 08:47 AM #1
cant shift fast in higher rpms
it happened twice already raced a buddy a couple of times in a straight away from a dig and i get the jump in 1st but once i try to hit 2nd it wont go in and i have to let it go in neutral.... whats going on?
-
09-24-2010, 09:17 AM #2
my 2002 z28 did the same thing. it shifts fine at 4 and 5000 rpm but once i get up to 6k or so then it shuts me out of third and my pedal sticks to the floor or goes soft. check your clutch fluid and make sure it is clean. if not change it. that may help. may also want to look into either doing the drill mod or getting a higher performance mc. i ended up going with the tick mc that comes with a better flowing and heat protected fluid line so you dont have to do the drill mod. will be putting it in this weekend so hopefully all gets straightened out. hope this helps. good luck man
-
09-24-2010, 09:45 AM #3
What he said...
Does it grind at all? If it does, you may have damaged synchros
-
09-24-2010, 11:28 AM #4
- Join Date
- Sep 2010
- Location
- WI
- Posts
- 129
- 2000 Trans Am
I went with a tick MC after I had the same problem and a new stock master cylinder didnt fix my issues.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: Car wont shift till 7000-7200 rpms???
By tbowman in forum Automatic TransmissionReplies: 7Last Post: 04-18-2010, 07:18 AM -
lower tire press. higher ET, higher press lower ET???
By greatwhiteZ28 in forum Drag RacingReplies: 1Last Post: 10-20-2007, 05:57 PM -
Cant shift at high rpms
By LTLDEV1 in forum Manual TransmissionReplies: 3Last Post: 05-17-2007, 10:22 PM -
higher redline
By 99-SS-Conv in forum General HelpReplies: 5Last Post: 02-02-2007, 07:51 AM -
WTB fast leather shift boot for 99 m6
By icemanfour662005 in forum Parts Wanted / TradeReplies: 0Last Post: 02-06-2006, 04:31 PM
Bookmarks