Results 1 to 2 of 2
Thread: motor help ls1 carb?
-
04-04-2006, 08:01 PM #1
motor help ls1 carb?
have a 99 5.3 liter truck motor. doing a conversion into a mud truck. want to use the 5.3 and do the MSD carb setup and a 350 turbo. is there any1 here can help me out to tell me what all is needed to do conv.i have a 350 turbo, the 5,3 truck motor what can i do for the trans, which converter do i use and does the turbo bolt up yo yhe 5.3 liter
-
04-05-2006, 03:27 PM #2
- Join Date
- Sep 2005
- Location
- wisconsin
- Age
- 50
- Posts
- 52
i used the edelbrock kit, it comes with the intake manifold, msd box, and wiring harness, and throttle cable brackets
the th350 trans will bolt up to the 5.3 but 1 bolt hole will not be used(no big deal), and you will need a crankshaft adapter for the th350 converter, these can be purchased from summit racing for $40 hup-hp3795 made by hughes performance
the converter bolt holes in the flex plate will need to be ovaled out a bit with a dremmel or carbide grinder bit to make the holes match the early converter bolt pattern, you could buy a aftermarket flex plate with dual patterns but they are still kind of expensive and so far mine is holding up just fineLast edited by jay_lt4; 04-05-2006 at 03:30 PM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
How Big A Carb Do You Need?
By Ed Blown Vert in forum General HelpReplies: 0Last Post: 07-22-2014, 02:30 AM -
how to set a ls1 with a carb set up
By mrclean0130 in forum General HelpReplies: 1Last Post: 04-23-2011, 03:57 PM -
Indy Motor Speedway Carb Day 5-22-09 COOL PICS!!!!
By 96Firebirdformula in forum Almost Anything GoesReplies: 9Last Post: 05-23-2009, 05:55 AM -
Wanted: SBC Carb
By JoshieDoom in forum Parts Wanted / TradeReplies: 0Last Post: 09-12-2008, 11:07 PM -
carb on LS1
By track 'bird in forum General HelpReplies: 7Last Post: 07-12-2008, 03:26 AM
Bookmarks