Results 1 to 6 of 6
Thread: I'm very frustrated
-
06-03-2006, 08:55 PM #1
- Join Date
- Mar 2006
- Location
- Northeast Louisiana
- Age
- 48
- Posts
- 93
Hugger Orange- 98 Camaro
I'm very frustrated
Here's the deal...
Out on the street my camaro shifts fine, 1-2 @ 6200, 2-3 @ 6000. I go to the track and the damn thing wont shift out of 2nd, drive out to the street and it shifts fine, Put it on the starting line where it hooks and it won't shift out of second. I'm hitting the rev limiter going thru the traps in the 1/8th. The rev limiter is set at 6500. IM BAFFLED, I DONT UNDERSTAND...
I use the Hypertech 3 programmer. Shift points are set at -1 1-2 and -12 2-3. Tires @ 26" and 3:73 gears. All info is correct, i dont get it. Like I said, take it out on the street and just play around, everything does perfectly, pt it on the track and it wont shift. I'm just putting it in drive.
-
06-03-2006, 08:58 PM #2
- Join Date
- Aug 1999
- Location
- Arizona
- Posts
- 51,377
Black- 383 Procharged & N20 Vert
I know when I put my shifter in D instead of OD. My tranny shifts late.
Black 1999 Blown Convertible A4
Forged 383 | ATI D-1SC
NX MAF Kit | 222/226 .585 115
AS Stage II 6.0L FI Heads
Moser 9" | 3.70 | Wavetrac | 35 Spline | Vigilante 3600
548.0 RWHP - 563.8 RWTQ - 10# - D1
666.0 RWHP - 734.2 RWTQ - 125 Shot - P1
Black 2009 Escalade Hybrid 4WD
-
06-03-2006, 10:15 PM #3
could be a few things, mine did this also before it was rebuilt.
first the 2-3 clutch packs might be going out, of the solinoid(sp) is not holding pressure. i personally think its the 2-3 clutch pack that is wearing out in it
-
06-16-2006, 10:56 PM #4Originally Posted by Ed Blown Vert
-
06-17-2006, 04:48 PM #5Originally Posted by ZbonerCold Air Intake, Muffler Delete, Vinci High Performance Dual Valve Springs, Hardened Pushrods, Yella Terra 1.85 Rockers, Some Hydropdipped Stuff, Strut Tower Brace, Some SS Badges, boost/vacuum gauge, fuel pressure gauge, some checkered stripes, drilled/slotted rotors, ZL1addons Stealth wickerbill, Ruxifey LED side markers
-
06-19-2006, 06:36 AM #6
- Join Date
- May 2006
- Location
- detroit,mi.
- Age
- 38
- Posts
- 8
black- 2002 z-28
I have a problem that my car is hitting the rev limiter 1-2 and 2-3 ever scince i put in my gear. I have this problem all the time though i think i need to have the shift points adjusted.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Getting really frustrated!!!!
By ThunderChicken in forum Request and FeedbackReplies: 4Last Post: 12-14-2010, 01:31 PM -
Help: Frustrated NEED Help
By speedracer25f in forum General HelpReplies: 9Last Post: 03-26-2008, 03:00 PM -
Help: Frustrated, need help
By speedracer25f in forum General HelpReplies: 1Last Post: 03-17-2008, 07:46 PM -
frustrated
By aPerfectTransAM in forum General HelpReplies: 8Last Post: 09-04-2006, 07:12 PM -
Getting frustrated...Need Help!!!
By Mr. Luos in forum Internal EngineReplies: 15Last Post: 03-03-2006, 09:14 PM
Bookmarks